Using The Counter - JUKI LBH-1790A Series Instruction Manual

9. Using the counter

(1) Setting procedure of the counter value
1) Call counter setting screen.
When COUNTER key 
under the input mode where SET READY LED
 goes out, the counter screen A is displayed to
enable setting of the counter.
Setting of the counter value can be performed
only with the input mode.
In case of the sewing mode, press READY key ❷
to set the mode to the input mode.
2) Selection of kinds of counters.
Press ITEM SELECT key ❻
pictograph B which indicates the counter type in
reverse video.
Press DATA CHANGE key ❼
the counter you desire from among the kinds of
counters below.
3) Change of counter set value.
Press ITEM SELECT key ❻
Press DATA CHANGE key ❼
4) Change of existing counter value.
Press ITEM SELECT key ❻
Press RESET key ❸
In addition, it is possible to edit the numerical value with DATA CHANGE key ❼
is pressed
to display the
, and select
to display the set value C of the counter in reverse video.
and input the set value until count-up is reached.
to display the current value D of the counter in reverse video.
and the value on the way of counting can be cleared.
– 28 –
A B D C
 ❷ ❸
❻ ❼

.