(10) Managing the cord
❺
❹
1) Slowly tilting the sewing machine, check
that the cords are not forcibly pulled.
❶
2) Bring the cords under the table into the
control box.
3) Put the cord brought into the control box
❸
through cord exit plate ❷ and fix cable
clip band ❸ .
❷
4) Install control box lid ❹ with four set-
screws ❺ .
– 10 –
When you tilt the sewing ma-
chine, make sure that the sewing
machine head support bar ❶ is
placed on the table.