JUKI LBH-1790A Series Instruction Manual page 44

3) Selecting the menu.
Items which can be registered on the key are displayed. Press ITEM SELECT key ❻
target menu. When you press EDIT key ❽
invoked.
1. Memory switch 1
→ Refer to
"V-21. Method of changing memory switch data" p.51
2. Version display
Version of the system software is displayed.
3. Communication
→ Refer to
"V-26. Communication" p.58
4. Regist. of parmtr key
→ Refer to
"V-16. Using parameter register key" p.42
5. Sewing parameter edit selection
→ Refer to
"V-12. Method of setting sewing data with/without edit" p.32
6. USB format
→ Refer to the Engineer's Manual for details.
7. Check parogram
→ Refer to the Engineer's Manual for details.
8. Pedal VR adjustment
→ Refer to
"V-23. How to adjust the pedal variable resistor" p.56
9. Adjustment of contrast
→ Refer to
"V-24. How to adjust the contrast" p.57
10. Memory switch 2
→ Refer to
"V-22. Memory switch data list" p.52
11. Key lock
→ Refer to the Engineer's Manual for how to enable selection of the key lock from the mode screen
and how to set the key lock.
For the functions which are not described in this manual, only the maintenance
personnel is allowed to operate while referring to the Engineer's Manual since op-
erating those functions can lock up the sewing machine or can cause unforeseen
accidents.
during the menu selection, the following screens can be
for details.
for details.
for details.
for details.
– 41 –
to select the
for details.
for details.
for details.