4) Change data of selected editing point.
Press DATA CHANGE key ❼
Pattern No. which has been registered is displayed and it is possible to select.
In addition, press RESET key ❸
When RESET key ❸
ed.
Repeat steps 3) and 4) to perform editing data.
5) Cancelling insertion of the pattern data.
When RESET key ❸
the pattern data can be cancelled.
In addition, when READY key ❷
mode changes over to the sewing mode.
When RETURN key ❾
es over to the input mode.
6) Creating new pattern data
Press COPY key
key ❻
to select the new-creation pictograph. This enables the creation of new pattern data.
When you press DATA CHANGE key ❼
pattern number to be newly created can be selected.
Then, select the pattern number to be newly created and press READY key ❷
pattern data.
and data of editing point can be changed.
, and the pattern data of editing point can be deleted.
is held pressed for one second, all the registered pattern data can be delet-
is pressed while the addition command pictograph is displayed, insertion of
is pressed, insertion of the pattern data is cancelled and the
is pressed, insertion of the pattern data is cancelled and the mode chang-
, under the input mode, to call the copy screen. Then, press ITEM SELECT
while the new-creation pictograph is being selected, the
– 48 –
to create new