JUKI LBH-1790A Series Instruction Manual page 56

No.
U018 Cloth cutting knife size
Input knife size used.
U019 Function of plural motions of cloth cutting knife
Ineffective/effective
Ineffective
Function of thread breakage detection Ineffective/
U020
effective
Ineffective
U021 Selection of presser position at the time of ON of READY
key (Up/Down)
Presser foot position when READY key is pressed is set.
Presser up
Selection of the position of presser foot at the time of
U022
the end of sewing (Up/Down)
This item sets the position of presser foot at the time of the end of
sewing. (Effective only at the time of 1-pedal setting)
Presser up
Needle thread trimming motion start distance
U023
Distance from the start of sewing to the start of needle
thread trimmer release motion is inputted.
Bobbin thread trimming motion start distance
U024
Distance from the start of sewing to the start of bobbin
thread trimmer release motion is inputted.
Counter updating unit
U025
Unit to update sewing counter is set.
Total number of stitches Non-display/Display
U026
Non-display
LED light luminance setting
U027
U500 Language choice
The language to be used for the display on the sewing
panel is selected.
* The number of selectable languages differs depending
on the specifications of the sewing machine at the time
of shipment.
Item
Effective
Effective
Presser down
Presser down
Display
– 53 –
Setting range Edit unit
3.0 to 32.0 0.1 mm
– –
– –
– –
– –
0 to 15.0 0.1 mm
0 to 15.0 0.1 mm
1 to 30 1
– –
0 to 5 1
– –
Initial value
32.0 mm
Ineffective
Effective
Presser Up
Presser Up
1.0 mm
1.5 mm
1
Non-display
5
Not yet
selected