Select A Base; De-Register A Handset; Internal Calls; Call Another Handset - BT Synergy 6500 User Manual

Select a base

If your BT Synergy handset is registered to more than one base,
you can select which base to use.
1. Press Menu, scroll
press Select.
2. Scroll to
Select Base
3. All base numbers are displayed. (In use) is added to bases
where the handset was previously registered to. Scroll
to the base you want and press Select.
4. Display shows
Searching Base....
for that base.

De-register a handset

1. Press Menu, scroll
press Select.
2. Scroll to
De-register
3. Enter the system PIN and press OK.
4. Scroll or to the handset you want to de-register and
press Select.
5. Press to confirm or
Yes
de-registration.
6. Press to return to the previous menu level.
Back

Internal calls

Call another handset

If you have more than one handset registered to the base, you can
make internal calls between two handsets.
1. Press then the number (1-5) of the handset you want
to call.
2. Press to dial.
OK
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email bt.helpdesk@sgweurope.com
or to
Registration
and press Select.
then the standby display
or to
Registration
and press Select.
to cancel. The display confirms
No
and
or
Use one handset to de-register
another. You cannot de-register the
and
handset you are using.
Default PIN code = 0000
Handset external display
When an internal call is received,
the display shows
Handset X
handset) and the handset number.
If all handsets are on an internal call,
then any incoming external call will
be indicated by a tone in the earpiece
and the caller's details will be shown
on the display (if you have subscribed
to a Caller Display Service, see
page 34).
Internal Call
(where is the calling
X
55