Clock & Alarm; Date & Time; Set Alarm; Alarm On /Off - BT Synergy 6500 User Manual

Clock & alarm
Date & time
If you subscribe to your network's Caller Display service, the base
sets the date and time for all handsets whenever a call is received.
You can manually set the time on an individual handset.
1. Press Menu, scroll
2. is highlighted, press Select.
Date & Time
3. Enter the date using the format DD/MM/YY and press Save.
4. Enter the time and press Save.
5. Press to return to the previous menu level.
Back

Set alarm

1. Press Menu, scroll
2. Scroll to
Alarm
3. Press or to select
4. Press or to select Once,
press Select.
5. Enter the time you want the alarm and press Save.
6. Press to return to the previous menu level.
Back

Alarm on /off

1. Press Menu, scroll
2. Scroll to
Alarm
3. Press or to select
4. Press to return to the previous menu level.
Back
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email bt.helpdesk@sgweurope.com
to
Clock & Alarm
to
Clock & Alarm
and press Select.
and press Select.
On
Mon-Fri
to
Clock & Alarm
and press Select.
or and press Select.
On Off
and press Select.
and press Select.
or and
On Daily
and press Select.
You can set the time to either 12 or
24 hour format, see page 30.
When the alarm is set, the display
shows the icon.
Each handset can have a different
alarm setting.
Once an alarm has been set, you can
switch the setting on or off.
If the alarm was set to
Once
will disappear from the screen.
If set to or
On Daily Mon-Fri
will remain on the screen.
If you are using the handset to make
a call when the alarm ring is due, the
flashes and you hear a beep in the
earpiece.
29
the
the