Using Additional Handsets; Registering An Additional Handset - BT Synergy 6500 User Manual

Using additional handsets

You can use up to five BT Synergy additional handsets with your
BT Synergy 6500 base to extend your phone system without
needing to install extension sockets for each new phone.
Your BT Synergy 6500 handset can also be registered to up to 3
other bases. You can then select the base you would prefer to use.
If you have purchased a BT Synergy 6500 multiple pack any
additional handsets come pre-registered to the base.
If you have purchased an additional handset separately you must
register it to your BT Synergy 6500 base before it can be used.

Registering an additional handset

At the base:
1. Press and hold for 3 seconds until the base Power / In use
light starts flashing. You have up to 60 seconds to register
the handset.
At the handset:
1. If the handset is new and the display shows
Register. Press Menu. The display shows Registration.
Press Select.
Or
If the handset has already been registered to another base the
standby display is shown. Press Menu, scroll
and press Select.
Registration
2.
Register Handset
3. Bases are displayed. If necessary, scroll
base you wish to register your BT Synergy 6500 handset to and
press Select.
4. Enter the system PIN and press OK.
5. The display shows
Searching Base X
base number) then
The handset is automatically assigned the next available
handset number.
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email bt.helpdesk@sgweurope.com
is highlighted. Press Select.
(where X is the chosen
Handset Registered.
Please
or to
or to a new
Default PIN code = 0000
If registration is not successful first
time, please repeat the process again
incase the base registration period
ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. You must de-
register another handset before you
can register the new one.
54