Switch Your Answering Machine On Remotely; Play Messages - BT Synergy 6500 User Manual

5. Enter the Old 4-digit PIN and press Save.
(Default setting = 0000)
6. Enter the new 4-digit PIN and press Save.
7. Enter the new PIN again and press Save.
8. Press to return to standby.
Back

Switch your answering machine on remotely

If you forget to switch your answering machine on, you can do it
remotely from another phone.
1. Dial your telephone number and let it ring. After 20 rings you
will hear your outgoing message.
2. Press , then enter your security code.
*
(Default setting = 0000)
3. Press and your answering machine will switch on ready
0
to answer incoming calls.

Play messages

1. Dial your phone number. When you hear your outgoing
message, press .
*
2. Enter your 4 digit PIN.
3. Use the keypad to operate your answering machine:
To hear main menu
1
To play messages
2
To play new messages
3
To skip back during messages
4
To delete during messages
5
To skip forward during messages
6
To set to answer only (or answer and record) depending
7
upon the Answer Mode status of the product at that time.
To record a new outgoing message
8
To set answer off
9
To set answer on
0
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email bt.helpdesk@sgweurope.com
Time saver
When you ring in to access your
messages remotely, if your answering
machine is set to time saver and you
have new messages it will answer
after 2 rings, if you do not have any
new messages, it will answer after 6
rings. This means you can hang up
after 3 rings knowing you have no
new messages, saving you time and
the cost of the call.
You cannot use this feature if you
have BT Answer 1571 or Call Minder
active as the call will be intercepted
before the 20 rings.
Your handset will automatically return
to standby if no button is pressed for
8 seconds or more.
If you have any new messages they
will be played after you have entered
your security PIN code.
If you enter an incorrect PIN code
you will hear 'Incorrect security code.
Please enter your security code'.
You can try entering the code again.
If it is still incorrect you will hear the
voice prompt and your BT Synergy
will hang up.
If no button is pressed for 8 seconds
or more your BT Synergy will hang up.
46