Select A Base; De-Register A Handset - BT Synergy 5100 User Manual

Select a base

If your BT Synergy 5100 handset is registered to more than one base, you can
select which base to use.
1. Press menU, scroll
2. Scroll to select Base and press select.
3. All base numbers are displayed. (In use) is added to bases where the handset
was previously registered to. Scroll
press select.
4. Display shows searcHing Base.... then the standby display for that base.

De-register a handset

1. Press menU, scroll
2. Scroll to De-register and press select.
3. Enter the system PIN and press ok.
4. Scroll or to the handset you want to de-register and
press select.
5. Press Yes to confirm or no to cancel. The display confirms de-registration.
6. Press Back to return to the previous menu level or close the handset cover to
return to standby.
If you experience any problems, please call the Helpline on 0800 145 6789* or email bt.helpdesk@sgweurope.com
or to registration and press select.
or to the base you want and
or to registration and press select.
Using additional handsets
Use one handset to de-register another. You
cannot de-register the handset you are using.
Default PIN code = 0000
49