Auto Talk; Key Beep; Pabx Access Code - BT Synergy 6500 User Manual

Auto talk

1. Press Menu, scroll
2. is highlighted. Press Select.
Set Handset
3. Scroll to
Auto Talk
4. Scroll or to
5. Press to return to the previous menu level.
Back

key beep

1. Press Menu, scroll
2. is highlighted. Press Select.
Set Handset
3. Scroll to
Key Beep
4. Scroll or to
5. Press to return to the previous menu level.
Back

PABx access code

1. Press Menu, scroll
2. is highlighted. Press Select.
Set Handset
3. Scroll to
PABX Access Code
4. Scroll or to On,
Select.
If you select Code, enter the switchboard access code
Set
e.g. 9 then press Save.
5. Press to return to the previous menu level.
Back
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email bt.helpdesk@sgweurope.com
to and press Select.
Settings
and press Select.
or then press Select.
On Off
to and press Select.
Settings
and press Select.
or then press Select.
Off On
to and press Select.
Settings
and press Select.
or
Off Set Code
then press
With Auto talk ON, when the phone
rings you can answer it by simply
lifting the handset from the base
station. Similarly, a dialled call can be
ended by placing the handset back on
to the base station.
With Auto talk Off, you need to press
the button to answer incoming
calls even after lifting the handset
from the base station. To end a call
the button must be used.
Keybeeps are turned off by default.
Where your BT Synergy 6500 is
installed as an extension to a PBX
or switchboard, you can enable the
PABX access code feature, with the
code normally used to obtain an
outside line on the PABX (typically 9).
Your BT Synergy will then
automatically prefix any entry dialled
from the phonebook, redial or calls
list with the PABX access code.
25