Date And Time - BT Synergy 6500 User Manual

2. Activate the batteries as described previously on page 7.
3. Place the handset on the charger to charge for at least 24
hours. When the handset is fully charged the
indicate that it is fully charged.
Your BT Synergy 6500 is ready for use.

Date and time

Providing you have subscribed to your network's Caller Display
service, the date and time is set automatically for all handsets
when you receive your first call. The date and time is recorded
with each answering machine message you receive.
If you do not have a Caller Display service you can set the date
and time manually. Please see page 29 for these instructions.
Removing the batteries
If you ever need to remove the batteries, simply slide open the
battery compartment cover and pull the ribbon away from the
handset to release the batteries.
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email bt.helpdesk@sgweurope.com
icon will
Only use rechargeable batteries as
specified in this guide.
8