Intermec PB42 Supplementary Manual

The printer shoulder strap (P/N 074788-xxx) provides you with a convenient
way to carry your PB42, PB50, or PW50 printer. The wide padded strap makes it
comfortable to wear the printer for long periods of time.
The shoulder strap kit contains these parts:
• Shoulder strap accessory
• These instructions

To attach the shoulder strap to the PB42 or PB50

1 Install the handstrap on the printer.
2 Orient the shoulder strap so that the textured side of the strap padding is facing
toward the printer. You want the textured side of the padding to sit on your
shoulder when the strap is installed.
3 Attach the snap hooks on the ends of the shoulder strap to the D-rings on the
handstrap.
You are now ready to use the PB42 or PB50 with the shoulder strap accessory.

Printer Shoulder Strap Instructions

D-ring
(2 places)
Handstrap
Shoulder strap