Intermec PB50 User Manual page 83

PB50 and PB51 Mobile Printer User Guide
Print Technology
Printhead:
Maximum print width:
Media Specifications
Core inside diameter, standard:
Core inside diameter, with adapter:
Maximum roll outside diameter:
Media width, label with liner/receipt:
Media length, label:
Media length, receipt:
Media caliber, label with liner/receipt:
Media caliber, tag (maximum):
Gap length (centered on perforation):
Notch length (centered on
perforation):
Notch width (centered on perforation): 12.7 mm (0.50 in)
Black mark length (centered on
perforation):
Black mark width (centered on media
width):
Receipt roll stock media is supplied as a continuous roll. Label, tag,
and fanfold media use repeat indicators for non-continuous media.
Gap, notch, and black marks are used as repeat indicators:
• Gap: Label and fanfold media
• Notch: Tag media
• Black mark: Label, tag, and fanfold media
Appendix A — Specifications
Direct thermal
108 mm (4.25 in)
19 mm (0.75in)
10.2 mm (0.4 in)
67.3 mm (2.65 in)
49mm (1.9 in) to 111.5 mm (4.4 in)
25.4 mm (1.0 in) to 609.6 mm
(24 in)
Continuous
0.05 mm (0.002 in) to 0.165 mm
(0.0065 in)
0.15 mm (0.006 in)
3.17 mm (0.125 in) to 12.7 mm
(0.50 in)
6.35 mm (0.25 in)
3.17 mm (0.125 in) to 12.7 mm
(0.50 in)
Full width of media
71