Upgrading The Printer Firmware Using The Printer Home Page - Intermec PB50 User Manual

Upgrading the Printer Firmware Using the Printer Home Page

PB50 and PB51 Mobile Printer User Guide
If your printer is connected to your PC through a serial
connection, the wizard displays the estimated download time.
When the upgrade is complete, your printer restarts.
You can upgrade your printer using the printer home page if you have
a printer with an 802.11 radio, and are using IPL or Fingerprint.
To upgrade using the printer home page
1 Establish a connection between your printer and the network. For
help, see "Setting Up 802.11 Radio Communications" on
page 34.
2 Establish a connection between your PC and the network.
3 Download the firmware (.bin) file you want to upgrade to your PC.
a Go to www.intermec.com.
b Click Support > Downloads.
c Use the Product Category, Product Family, and Product
fields, to select the printer model.
d Click Submit. The latest available software appears.
e Download the latest firmware version to your PC.
f Extract the .zip file to your PC.
4 If you are using Fingerprint or IPL, use the Control Panel to find
the IP address of the printer.
a Press the Setup button.
b Press until Network appears.
c Press to select the Network menu.
d Press until you reach IP Address.
e Press to select and view the IP Address.
f Press the Setup button to return to Ready mode.
5 Start a web browser.
Chapter 2 — Configuring the Mobile Printer
49