Cleaning The Printer - Minolta PagePro 1200W User Manual

8
Resetting the counter for the drum cartridge
After you have replaced the drum cartridge, reset the drum cartridge
counter.
1
Turn off the printer.
2
While holding down the panel button, turn on the printer.
The green "Ready" indicator begins to blink.
3
Continue holding down the panel button, and the green "Ready" indi-
cator starts to blink.
4
After the green "Ready" indicator has blinked for about 5 seconds, re-
lease the panel button.
Both indicators begin to blink.
5
After confirming that both indicators are blinking, briefly press the
panel button.
Both indicators light up for about 5 seconds, and then both indicators
begin to blink.
The counter for the drum cartridge has now been reset.
6
Turn the printer off and then on again.
Once the green "Ready" indicator remains on, the printer is again in
Stand-by mode.
8.3

Cleaning the printer

Clean the printer at regular intervals to prevent dust, dirt, and paper resi-
due from accumulating in and on the printer.
Cleaning the outside of the printer
1
Turn off the printer and disconnect the power cord from the printer.
2
Wipe the outside of the printer with a soft cloth. You may moisten the
cloth with a little neutral household cleaner if you wish.
8-10
Maintaining the printer