Installing The Usb Device Driver And Printer Driver Under Windows 98 - Minolta PagePro 1200W User Manual

Installing the printer driver
6
Select "Local Printer."
Do not check the "Automatically detect and install my Plug and
Play printer" box.
7
Choose [Next].
8
Choose the "Use the following port:" button, select the port you want
to use, and then choose [Next].
If you are using a parallel connection, select "LPTx:" (x=1, 2, etc.).
If you are using a USB connection, select "USB001."
9
Choose [Have Disk], and then choose [Browse].
10
Browse the CD-ROM and navigate to "\Drivers\language\Win2000."
11
Choose [Open].
12
Choose [OK], and then choose [Next].
13
Follow the instructions on the screen to complete the installation.
14
Check that the "MINOLTA-QMS PagePro 1200W" printer icon is dis-
played in the Printers dialog box.
15
Remove the CD-ROM from your PC's CD-ROM drive. This completes
the installation of the printer driver.
3.6 Installing the USB device driver and printer driver
under Windows 98
When connecting the printer to your PC with a USB cable, install the USB
device driver according to the following instructions before installing the
printer driver.
If you have connected the printer to your PC with a parallel cable, skip to
the following section, "To install the printer driver using the Installer under
Windows 98," on page 3-23.
To install the USB device driver under Windows 98
1
Turn on your PC.
2
Turn on the printer.
3
When Windows and the printer are both ready, insert the CD-ROM
that came with your printer into your PC's CD-ROM drive.
3
3-21