Table of Contents
Advertisement
8
4
After the green "Ready" indicator has blinked for about 5 seconds, re-
lease the panel button.
Both indicators begin to blink.
5
After confirming that both indicators are blinking, press and hold down
the panel button again for at least 5 seconds.
Both indicators light up for about 5 seconds, and then both indicators
begin to blink again.
The counter for the toner cartridge has now been reset.
6
Turn the printer off and then on again.
Once the green "Ready" indicator remains on, the printer is again in
Stand-by mode.
8.2
Replacing the drum cartridge
Change the drum cartridge when the printed documents become faint or
blurred.
The drum cartridge has a capacity of about 16,000 (one-page jobs) to
20,000 (continuous printing) letter/A4 pages (at an average of 5% or less
coverage).
WARNING
The fusing unit can become very hot!
The fusing unit, which is located beneath the top cover, can become very
hot when the printer is in operation.
To prevent injuries, avoid contact with this area.
8-6
Maintaining the printer
Fusing unit
Advertisement
Table of Contents
