Table of Contents
Advertisement
Working with the printer
2
Remove the cover from the tray.
3
Press down on the paper lifting
plate until it locks into place.
4
Place a stack of paper into the tray.
Make sure that the paper fits under
under the triangular clips.
How many sheets of paper may
?
I place in the tray?
Tray 2 has a capacity of 500
sheets of plain paper. The stack
of paper should not rise above
the media limit mark.
How is letterhead fed in?
?
Load letterhead with the side to be printed facing up and the
preprinted letterhead at the top (facing the printer).
5
Replace the tray cover and insert
the tray into the lower feeder unit.
6.4
Determining the direction printed sheets
Printed sheets can be output in two ways:
Face down
Face up
The printer is fitted with a tray for face-down output. A tray for face-up
output is available as an option. This tray is especially suitable for thick
paper and envelopes because the path through the printer is straighter.
6
6-7
Advertisement
Table of Contents
