Printable Area; Printing Speed - Intermec EasyCoder PC4 User Manual

Printable Area

Width, max at 203.2 dpi
Width, max at 300 dpi
Length, max. (203.2 dpi):
Length, max. (300 dpi):
Media
Roll Diameter, max:
Core Diameter, min/max:
Media Width, max:
Media Width, min.
Label Length, min:
Max. Thickness, rolls:
Max. Thickness, fan-folds:
Min. Thickness, all:
Thermal Transfer Ribbons
Intermec transfer ribbons only (wax, hybrid, and resin) in widths of 33, 60, 63.5, 83.5,
89, and 110 mm (1.33, 2.36, 2.5, 3.29, 3.5, and 4.33 inches) centered on 110 mm (4.33
inches) wide cardboard cores.
Core inner diameter:
Max. ribbon roll diameter:
Ink coated side facing outwards, cores with notches

Printing Speed

8 dots/mm
11.81 dots/mm
Sensors
Label gap, label mark, label taken, out-of-media, ribbon end, print frame open/closed.
Print Directions
Text, bar codes, and graphics can be printed in four directions.
Fonts
5 resident alphanumeric fonts (can be magnified up to 8 times horizontally and 9 times
vertically)
EasyCoder PC4 User's Guide
Appendix A — Technical Data
108.0 mm (4.25 inches)
102.2 mm (4.02 inches)
1,140 mm (45 inches)
760 mm (30 inches)
125 mm (5 inches)
25.4/38.1 mm (1.0/1.5 inches)
116.0 mm (4.57 inches)
25.4 mm (1.0 inches)
6.35 mm (.25 inches)
0.15 mm (.0006 inches)
0.17 mm (0.006 inches)
0.06 mm (.003 inches)
13 mm (0.5 inches)
41 mm (1.6 inches).
30, 40, 50, 75, or 100 mm/sec.
(1.2, 1.6, 2, 3, or 4 inches/sec.)
30, 40, or 50 mm/sec.
(1.2, 1.6, or 2 inches/sec.)
37