Description Of Easycoder Pc4 - Intermec EasyCoder PC4 User Manual

Chapter 1 — Introduction

Description of EasyCoder PC4

Intermec EasyCoder PC4 is a series of dedicated direct thermal and com-
bined thermal transfer/direct thermal printers with a printhead density of
203.2 dots per inch (8 dots per mm) or 300 dots per inch (11.81 dot per
mm).
The EasyCoder PC4 printers are fitted with parallel Centronics, serial
RS-232 and USB ports as standard.
As an option, the EasyCoder PC4 can be fitted with a paper cutter that
cuts continuous strip or liner between labels or a battery pack.
All EasyCoder PC4 printers are delivered with the Intermec InterDriver
for Microsoft Windows 98/Me, and Windows NT 4.0/W2000/XP. The
InterDriver makes it possible to produce printouts from most standard
programs run under the various versions of MS Windows.
Label design becomes an easy task with Intermec LabelShop, a series of
"what-you-see-is-what-you-get" PC label-editing programs and com-
patible with the full range of Intermec EasyCoder printers. Intermec
LabelShop START is included in the delivery.
EasyCoder PC4 can also be run using ESim control commands described
in the EasyCoder ESim v6.XX, Programmer's Reference Manual. These con-
trol commands use short lines of ASCII characters to format the labels,
enter text and bar codes and control the printing, making it possible to
use a terminal or personal computer, that does not operate under MS
Windows.
For comprehensive technical data, refer to Appendix 1.
2 EasyCoder PC4 User's Guide