All Scan; Category Scan; Ent Push; Scan - Icom IC-RX7 Instruction Manual

6
SEARCH AND SCAN OPERATIONS

■ All scan

All scan repeatedly scans all memory channels programmed
with any frequencies in the memory channel selected for
scanning.
q Enter "ALL SCAN" in SCAN menu.
MENU ➪ SCAN ➪ ALL SCAN
(Push [MENU
• SCAN menu can also be entered by pushing and holding
[SCAN] for 1 sec.
• Scan pauses when a signal is received.
• Rotate [DIAL] to change the scanning direction.
w Push [HOLD V] to stop the scan temporarily, if desired.
• Push and hold [v] or [w] for 1 sec. several times to select the
desired category; or push [v] or [w] several times to select the
desired group.
• Push [HOLD V] again to restart the scan.
NO. MENU
DIAL
CLR

ENT

SQL MW
1 2 3
HOLD
4 5 6

SCAN

HOLD V
7 8 9
SEARCH
.
0

SKIP

ATT
42
]), (Push [r]/[s], then push [ENT MW].)
MENU
ENT
Push
MW

■ Category scan

Category scan repeatedly scans all memory channels in the
same category as the selected memory channel has been
programmed.
q Enter "CATEGORY SCAN" in SCAN menu.
MENU ➪ SCAN ➪ CATEGORY SCAN
(Push [MENU
• SCAN menu can also be entered by pushing and holding
[SCAN] for 1 sec.
w Push [r]/[s] (or rotate [DIAL]) to select the desired cat-
egory, then push [ENT MW].
• Scan pauses when a signal is received.
• Rotate [DIAL] to change the scanning direction.
ENT
MW
e Push [HOLD V] to stop the scan temporarily, if desired.
• Push and hold [v] or [w] for 1 sec. several times to select the
desired memory category; or push [v] or [w] several times to
select the desired group.
• Push [HOLD V] again to restart the scan.
]), (Push [r]/[s], then push [ENT MW].)