Beep Tones; Dial Speed Acceleration; Power Save - Icom IC-RX7 Instruction Manual

■ Beep tones

You can select to have confirmation beeps sound at the
push of a switch. The output level can be adjusted within 40
levels with "BEEP LEVEL" in SOUNDS menu.
MENU ➪ SOUNDS ➪ BEEP LEVEL (p. 70)
(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)
You can select silent operation by turning beep tones OFF
with "KEY-TOUCH BEEP" in SOUNDS menu.
MENU ➪ SOUNDS ➪ KEY-TOUCH BEEP (p. 70)
(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)

■ Dial speed acceleration

The dial speed acceleration automatically speeds up the
tuning dial speed when rotating [DIAL] rapidly.
This function can be turned ON and OFF with "DIAL
SPEED-UP" in SETTING menu.
MENU ➪ SETTING ➪ DIAL SPEED-UP (p. 68)
(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)
OTHER FUNCTIONS

■ Power save

The power save function reduces the current drain to con-
serve battery power.
The power save duty cycle, the ratio of receive circuit on to
receive circuit off during standby, can be set to automatic
1 : 4 , 1 : 8
( =125 msec. : 500msec.
or OFF with "POWER SAVE" in SETTING menu.
fault)
MENU ➪ SETTING ➪ POWER SAVE (p. 67)
(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)
• "AUTO" selects "1:4" duty ratio when receiving no signal for 5 sec.,
then "1:8" 60 sec. after that.
No signal
500 msec.
5 sec.
Circuit ON
Circuit OFF
125 msec.
=125 msec. : 1000 msec.) (de-
1000 msec.
60 sec.
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
83