Icom IC-RX7 Instruction Manual page 36

6
SEARCH AND SCAN OPERATIONS
■ Program search
q Enter "PROGRAM SEARCH" in SEARCH menu.
MENU ➪ SEARCH ➪ PROGRAM SEARCH
(Push [MENU
• SEARCH menu can also be entered by pushing and holding
[SEARCH] for 1 sec.
• Program number selection screen appears.
w Push [r] or [s] several times (or rotate [DIAL]) to select
the desired program number, then push [ENT MW] to
enter the program.
• A total of 25 program numbers (No. 00 to No. 24) are available.
e Push [ENT MW] again to start the search.
• Search pauses when a signal is received.
• Rotate [DIAL] to change the searching direction.
• After started the search, program number can be changed by
pushing [v] or [w].
r Push [HOLD V] to stop the search temporarily, if desired.
• Push [HOLD V] again to restart the search.
NOTE: Program searches can be customized, see pages
30, 31 for programming details.
28
]), (Push [r]/[s], then push [ENT MW].)
MENU
NO. MENU
DIAL ENT
CLR ENT
SQL MW MW
HOLD V 1 2 3
4 5 6
SCAN
HOLD V
SEARCH 7 8 9
.
0
ATT SKIP
ENT
Push
MW
ENT
Push
MW
ENT
Push
MW
Selected program
number appears