Icom IC-RX7 Instruction Manual page 14

2
PANEL DESCRIPTION
POWER KEY [ ]
Push for 1 sec. to turn the receiver power ON or
OFF. (p. 14)
ATTENUATOR KEY [• ATT]
➥ During VFO mode, push to input MHz digit for
ATT
frequency entry. (pgs. 20, 21)
➥ During link scan, push this key then push nu-
meral keys to turn the link setting ON and OFF.
(p. 51)
• Direct key number 0 to 9 can be selected by nu-
meral key only.
➥ Push and hold for 1 sec. to turn the attenuator
function ON and OFF. (p. 75)
SKIP KEY [SKIP]
➥ During scan holding state, push to set the
SKIP
memory channel as the following skip channel
in order. (p. 46)
• Skip channel — "SKIP" appears.
• Frequency skip channel — "PSKIP" appears.
• Non-skip channel — no skip indicator appears.
➥ During search operation, push and hold for 1
sec. to program a paused frequency as a skip
frequency. (p. 36)
➥ During link scan operation, push and hold for
1 sec. to select the group skip setting ON and
OFF. (p. 46)
6
ENTER/MEMORY WRITE KEY [ENT MW]
➥ During VFO mode, search holding state or
ENT
MW scan mode, push and hold for 1 sec. to enter
memory programming state. (pgs. 50, 56, 57)
➥ During search operation, push and hold for 1
sec. to turn the auto write search function ON
and OFF. (p. 34)
➥ During memory programming state, push and
hold for 1 sec. to write the operating frequency
into the selected memory channel.
➥ During menu screen operation or memory pro-
gramming state, push to enter to the selected
set items, etc. (p. 59)
MENU/LOCK KEY [MENU
➥ Push to select menu screen indication ON.
MENU
(p. 59)
➥ Push and hold for 1 sec. to toggle the lock
function ON and OFF. (p. 75)
]