Icom IC-RX7 Instruction Manual page 39

t Set the other items, if desired.
• Push [r] or [s] several times (or rotate [DIAL]) to select the
item, then push [ENT MW].
NAME
q P ush [ENT MW] (or [w]) to edit the name program-
ming.
w R otate [DIAL] to select the desired character.
• The selected character blinks.
• Push [r] or [s] to select the character group from "ABC" (al-
phabetical characters; capital letters), "abc" (alphabetical char-
acters; lower case letters), "123" (numbers) or "!"#" (symbols).
See next page for available characters details.
• Push [v] or [w] to move the cursor left or right, respectively.
• Push [CLR SQL] to clear the selected character.
• Push and hold [CLR SQL] to repeat clearing continuously.
e P ush [ENT MW] to set the name and return to the pro-
gram edge edit state.
SEARCH AND SCAN OPERATIONS
TS/MODE/ATT
q P ush [ENT MW] (or [w]) to edit the tuning step setting.
w P ush and hold [r]/[s] (or rotate [DIAL]) to select the
desired setting.
e P ush [ENT MW] (or [w]) to set the setting.
r S et the mode or attenuator settings as same as steps
q to e.
• CLEAR
Continue from previous page's step w.
e Push [s] twice (or rotate [DIAL]) to select "CLEAR," then
push [ENT MW] (or [w]).
• "CLEAR?" window appears.
r Push [r] (or rotate [DIAL]) to select "YES," then push
[ENT MW].
• Select "NO," then push [ENT MW] to cancel clearing.
t Push [v] to finish the search edges clearing and return to
the program number selection screen.
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
31