Memory Channel Watch - Icom IC-RX7 Instruction Manual

6
SEARCH AND SCAN OPERATIONS
D Memory channel watch
q Select the watching memory channel.
➥ Push [SCAN] to start a scan, then push [HOLD V] to
hold the scan.
➥ Rotate [DIAL] to select the channel.
• Push and hold [v] or [w] for 1 sec. to change the category,
or push [v] or [w] to change the group.
w Select VFO mode and set the operating frequency, etc.
➥ Push and hold [HOLD V] for 1 sec. to select VFO
mode.
➥ Set the operating frequency and receiving mode (pgs.
19–22).
e Enter "PRIORITY" in SEARCH menu.
MENU ➪ SEARCH ➪ PRIORITY
(Push [MENU
• SEARCH menu can also be entered by pushing and holding
[SEARCH] for 1 sec.
r Push [r]/[s] (or rotate [DIAL]) to select "ON."
• Select "BELL" if the priority beep function is desired.
38
]), (Push [r]/[s], then push [ENT MW].)
t Push [CLR SQL] to return to VFO mode and start the
watch.
• "PRIO" indicator appears.
• The receiver checks the priority channel every 5 sec.
• The watch resumes according to the selected search resume
condition (p. 40), or push [CLR SQL] to resume manually.

• Memory channel watch

Monitors VFO frequency for
5 sec.
• Memory channel watch with priority beep
Emits beep and blinks "S" indicator when a signal is
received on a priority channel.
y Push [CLR SQL] to cancel the priority watch.
Pauses on a priority channel
when a signal is received.