Icom IC-RX7 Instruction Manual page 47

D Memory channel watch or scan watch during search
q Select the watching memory channel or scan.
For memory channel watch during search:
➥ Push [SCAN] to start a scan, then push [HOLD V] to
hold the scan.
➥ Rotate [DIAL] to select the channel.
• Push and hold [v] or [w] for 1 sec. to change the category,
or push [v] or [w] to change the group.
For scan watch during search:
➥ Select the desired scan (pgs. 41–43).
• Push and hold [v] or [w] for 1 sec. to change the category,
or push [v] or [w] to change the group.
w Enter "PRIORITY" in SEARCH menu.
MENU ➪ SEARCH ➪ PRIORITY
(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)
• SEARCH menu can also be entered by pushing and holding
[SEARCH] for 1 sec.
e Push [r]/[s] (or rotate [DIAL]) to select "ON."
• Select "BELL" if the priority beep function is desired.
r Push [ENT MW] (or [v]) to return to SEARCH menu.
t Push [r]/[s] (or rotate [DIAL]) to select the desired
search, then start the search.
• "PRIO" indicator appears.
• The receiver checks the priority channel(s) every 5 sec.
• The watch resumes according to the selected search resume
condition (p. 40), or push [CLR SQL] to resume manually.
SEARCH AND SCAN OPERATIONS
• Priority watch during search
Searches frequencies for 5
sec.
• Priority watch with priority beep during search
Emits beep and blinks "S" indicator when a signal is
received on a priority channel without pausing on the channel.
y Push [CLR SQL] to cancel the priority watch.
6
Pauses on a priority
channel when a signal is
received.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
39