Playing In Zone2/Zone3 (Multi-Zone Function); Audio Output; Video Output; Video Connection - Denon AVR-4310 Owner's Manual

Av surround receiver
Hide thumbs Also See for AVR-4310:
Table of Contents

Advertisement

Playing in ZONE2/ZONE3 (Multi-zone Function)

This function allows you to play sound in rooms other than the main
zone where multi-channel sound is played.
The source selected for ZONE2 is also output from the recording
output connectors.

Audio Output

There are two methods to do this, as described below. Choose one
of the methods.

q Zone playback by speaker output

w Zone playback by audio output (PRE OUT)
Use an external amplifier.
q Zone Playback by Speaker Output
The ZONE2 and ZONE3 audio signals are output from the AVR-4310's
SURR BACK/AMP ASSIGN speaker terminals using the amplifier
assignment function.
Connecting and Setting the Speakers
Amp
Assign
mode
setting (vpage 33) and
Connecting the speakers
the audio signals that
are output
ZONE2
ZONE2
Output signal :
Stereo (L / R)
ZONE3
ZONE3
Output signal :
Stereo (L / R)
ZONE2
ZONE2
(MONO)
and
ZONE3
Output signal :
Monaural
w Zone Playback by Audio Output
(PRE OUT)
Audio Connections (ZONE2, ZONE3)
The audio signals of the AVR-4310's ZONE2 and ZONE3 audio output
terminals are output to the ZONE2 and ZONE3 amplifiers and played
on these amplifiers.
MAIN ZONE
AVR-4310
Adjust the volume on the connected amplifier.
Also be sure to read the operating instructions of the connected
devices.
NOTE
ZONE2
We recommend using high quality pin-plug cables for audio
connections in order to prevent noise.
When the input source to which the digital input connectors
w
q w
q
(OPTICAL/COAXIAL) are assigned is selected in ZONE2 or ZONE3,
playback is only possible if the digital signal being input is in PCM
(2-channel) format.
It is not possible to play the digital audio signals input from the HDMI
ZONE3
or DENON LINK terminals in ZONE2 and ZONE3.
When certain digital signals are being input, noise may be output
from the ZONE2 and ZONE3 audio output connectors.
w
q w
q
ZONE2
ZONE3
w
q
w
q

Video Output

Video Connection

The video signals of the AVR-4310's ZONE2 video output terminal are
played by the ZONE2 TV.
MAIN ZONE
ZONE2
L
R
NOTE
ZONE3
It is not possible to output video signals input to the HDMI or
component terminals to ZONE2.
L
R
AVR-4310
ENGLISH


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents