Making the Settings to Play Still Pictures
(Still Picture)
This can be set when the input source is NET/USB
Setting items
Slide Show
ON : Display still picture images in a slide show.
Make slide show settings.
OFF : Display only the selected still picture image.
Interval
5s ~ 60s (5s)
Set the playback time per
image.
Automatically Presetting Radio Stations
(Auto Preset)
Setting items
Start
This can be set when the input source is TUNER .
Start
the
auto
preset
If an FM station cannot be preset automatically, select the desired
process.
station by tuning it in manually, then preset it manually.
Setting Preset Channels so that They are not Displayed
When Tuning (Preset Skip)
Setting items
A ~ G
This can be set when the input source is TUNER .
Set the preset channels that
All : All the preset channels in the selected memory block are skipped.
you do not want to display.
1 ~ 8 : Set the preset channels you do not want to displayed.
•
ON : Display the selected preset channel.
•
Skip : Do not display the selected preset channel.
When set to "All" to "Skip", it is possible to skip entire preset memory
blocks (A to G).
Main remote control
operation buttons
Default settings are underlined.
.
Setting contents
Default settings are underlined.
Setting contents
Default settings are underlined.
Setting contents
:Displaying the menu
Cancel the menu
Giving Names to Preset Stations (Preset Name)
Setting items
A1 ~ G8
This can be set when the input source is TUNER .
Select the preset channel.
1. Press
2. Use
3. Use
•
Up to 8 characters can be input.
•
The input character type can be switched by pressing
MENU
•
The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! # % & ' ( ) * + , - . / : ; < = " > ? @ [ \ ] (Space)
GNumbersH 0123456789
4. Repeat steps 2 and 3 to change the display name.
Default
Yes : Reset to the defaults.
No : Do not reset to the defaults.
Reset all settings to factory
default.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Making the Input Settings (Source Select)
Default settings are underlined.
Setting contents
ENTER
p
or
.
o p
to set the cursor to the character you want to change.
ENTER
ui
to change the character, then press
while the display name is being changed.
:Return to previous menu
ENGLISH
.
[SEARCH]
or