Sub Remote Control Unit; Amp Assign / Multi-Zone Connections And Operations; Multi-Zone Settings With The Amp Assign Function - Denon AVR-2808 Owner's Manual

Sub Remote Control Unit

The sub remote control unit (RC-1071) included with the AVR-2808 can be used as the exclusive multi-
zone remote control unit.
b The following describes operation for the selected zone. (Use [ZONE SELECT] to switch zones.)
• Turning the multi-zone power on and off
• Selecting the input source to be played
• Adjusting and temporarily muting the multi-zone volume
• Listening to the tuner
[ZONE SELECT]
[POWER OFF]
[CHANNEL+ / –]
[TUNING+ / –]
[ ],[ ],
8 9
[ / ],[ ]
1 3 2
[REPEAT]
ZONE SELECT Switching the zone to be operated
POWER OFF Power off
POWER ON Power on
SOURCE SELECT Switching the input source
VOLUME + / – Volume control
CHANNEL + / – Channel + / –
TUNING + / – Tuning + / –
MUTE Muting
SHIFT Switching the memory block
Auto search (cue)
8 9
Stop
2
Play / Pause
1/3
REPEAT 1-track / All -track repeat play
RANDOM 1-track / album shuffle play
b When using a Control Dock for iPod (ASD-1R), [ FAVORITES DIRECT PLAY ] cannot be used.
[POWER ON]
[SOURCE SELECT]
[VOLUME+ / –]
[MUTE]
[SHIFT]
[RANDOM]
Amp Assign / Multi-zone Connections and
Operations
The AVR-2808 is compatible with the following types of playback:
• Multi-zone playback (ZONE2 & ZONE3)
• Bi-amp playback (front speakers)
NOTE
• For bi-amp playback, use speakers compatible with that type of connection.
• When conducting bi-amp playback, remove the short-circuiting boards (or wires) from the speaker
terminals.

Multi-zone Settings with the Amp Assign Function

The amp assign function lets you assign the amplifiers for the different channels built into the AVR-2808 to
the speaker outputs for the different zones.
Select the desired playback environment from among "Setting 1" to "Setting 4" , then set the corresponding
"Amp Assign" mode at menu "Manual Setup" – "Option Setup" – "Amp Assign" (vpage 31).
Connect the speakers as described at "Amp Assign" mode settings and speakers connected to the various
speaker terminals.
"Setting 2" is possible to switch the Amp Assign mode between the 5.1-channel mode and 2-channel
mode without changing the speaker connections.
ENGLISH