Page 1 GUI-Menübedienung (vSeite 25) AV SURROUND RECEIVER GUI-Menüplan (vSeite 24) Sprache (vSeite 45) Bedienung mit der Fernbedienung (vSeite 86) AVR-4310 Français Utilisez ce manuel en même temps que le guide d’utilisation affiché sur l’écran GUI (Interface graphique). Fonctionnement du menu de l’interface graphique Owner’s Manual...
Page 2 ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA IMPOTANT SAFETY SAFETY PRECAUTIONS CAUTION: To completely disconnect this product from the mains, disconnect INSTRUCTIONS the plug from the wall socket outlet. CAUTION Read these instructions. The mains plug is used to completely interrupt the power supply to RISK OF ELECTRIC SHOCK Keep these instructions.
Page 3 SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANCAIS DEUTSCH ENGLISH NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA ANGÅENDE ANVÄNDNINGEN CAUTION: • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
Page 4 Het inpakmateriaal van dit product is recycleerbaar en kan opnieuw gebruikt worden. Er wordt verzocht om zich van elk afvalmateriaal te ontdoen volgens de plaatselijke voorschriften. DENON EUROPE Volg voor het wegdoen van de speler de voorschriften voor de verwijdering van wit- en bruingoed op.
Page 5: Table Of Contents
Accessories ··················································································3 Playing a Blu-ray Disc Player Compatible Insert Batteries in the Remote Control Unit ·································3 to the AVR-4310’s USB Port ························································54 with DENON LINK 4th ································································75 Operating Range of the Remote Control Unit ······························3 Tuning in Radio Stations ····························································55 Playing Super Audio CD ······························································75...
Page 6: Getting Started
Presetting ····················································································87 Check once again that all connections are correct and that there are Operating Preset Components ···················································87 Perform the operations leading to playback on the AVR-4310 in the no problems with the connection cables. Setting the Remote ID ································································90 order shown below.
Page 7: Preparations
(The In addition to the AVR-4310, the included main remote control unit product. supplied batteries are only for verifying operation.) (RC-1116) can also be used to operate the equipment listed below.
Page 8: Part Names And Functions
ENGLISH GWith the door openH Part Names and Functions Front Panel For buttons not explained here, see the page indicated in parentheses ( ). Q9 W0 Q7 W7 Headphones jack ········································ (64) HDMI IN connector ····································· (14) W8 ZONE2 ON/OFF button ······························ (84) USB (iPod DIRECT) port ·····························...
Page 9: Display
(a D.LINK indicator • ATTENDEE channel other than the front, center, surround, This lights when playing using DENON LINK This lights to indicate that party mode has surround back or LFE channel) is input. If there connections.
Page 10: Rear Panel
Analog audio connectors ····················· (15~18) DOCK CONTROL jack ································· (16) Digital audio connectors ······················ (15~18) PRE OUT connectors ···························· (21, 83) Speaker terminals ······································ (13) DENON LINK connector ····························· (19) EXT. IN connectors ····································· (20) SIGNAL GND terminal ······························· (16)
Page 11: Remote Control Unit
Operations Possible by Main Remote Control Unit Remote Control Unit Operations on the AVR-4310 Main Remote Control Unit (RC-1116) Operations on 9 devices other that the AVR-4310 • Preset the remote control codes of the devices to be operated ( v page 87). •...
Page 12 ENGLISH Part Names and Functions Sub Remote Control Unit (RC-1121) Selected Device Function button Button name select button indicator ZONE indicators ········································· (95) Preset Channel buttons ···························· (55, 60) QUICK SELECT buttons ······················· (78, 85) Tuner system buttons ························ (55, 60, 62) Input source select buttons ·······················...
Page 13: Connections
• Do not bundle power cords together with connection cables. Doing Analog (White) so can result in humming or noise. Other cables connections (Red) (stereo, surround) DENON LINK Audio cable connections DENON LINK cable Analog connections Network (monaural, for connections Audio cable Ethernet cable subwoofer) Speaker connections...
Page 14: Converting Input Video Signals For Output
Use the terminals according to the devices to be connected. Input Output This function automatically converts various formats of video signals input to the AVR-4310 into the format Output Input used to output the video signals from the AVR-4310 to a monitor. (vpage 104 “Relationship Between...
Page 15: Installing / Setting The Speakers
ENGLISH Installing / Setting the Speakers When 7.1ch (Front Height Speaker) Connected When 7.1ch (Front Wide Speaker) Connected • The AVR-4310 is compatible with various types of Front wide speakers Front height speakers surround playback. Front speakers • Decide on the surround modes to be played on the Front speakers z1: 22 ~ 30˚...
Page 16 ENGLISH Installing/Setting the Speakers s Set the “Amp Assign” Mode According to the Speaker Layout The signals output from the AVR-4310’s SURR. BACK/AMP ASSIGN speaker terminals can be switched (vpage 33 “Amp Assign”). Amp assign SURR. BACK / Amp assign SURR.
Page 17: Speaker Connections
B and + (red) and – (black) polarities on the speakers When the “Amp Assign” setting (vpage 33) is being connected to the AVR-4310, and be sure to “Bi-Amp”, connect as follows. interconnect the channels and polarities correctly. Subwoofer...
Page 18: Connecting Devices
ENGLISH Connections Connecting Devices Connecting Devices Equipped with HDMI Terminals The AVR-4310 allows connection of inputs from up to 6 HDMI devices and output to 2 monitors. Important Information Video Digital Connecting Devices Satellite cassette video About HDMI HD player...
Page 19: Connecting The Playback Components
• When the AVR-4310 is connected to other devices with HDMI cables, also connect the AVR-4310 and TV using an HDMI cable. The audio signals output from the HDMI connectors are only the For instructions on HDMI connections, see “Connecting Devices •...
Page 20 Set other than when iPod is assigned to the VCR (iPod) terminal. “Input Assign” – “iPod dock“ (vpage 48) NOTE The SIGNAL GND terminal of the AVR-4310 is not a safety ground connection. Connect it to reduce noise when noise is excessive. •...
Page 21: Connecting The Recording Components
Set this to change the input signal to which the input source is • To record video signals through the AVR-4310, use the same type “Input Assign” (vpage 46) assigned. of video cable for connection between the AVR-4310 and the player “Input Assign”...
Page 22 ENGLISH Connecting Devices Satellite Receiver / Cable Tuner (Set Top Box) FM/AM Connect the Tuner Select the terminal to use and connect the device. An FM antenna cable plug can be connected directly. For instructions on HDMI connections, see “Connecting Devices Direction of broadcasting station Equipped with HDMI Terminals”...
Page 23: Connections To Other Devices
Bend in the reverse direction. Multi-channel playback is possible with BD, Super Audio CD, etc. Video camera / Game console (vpage 75 “Playing a Blu-ray Disc Player Compatible with DENON LINK 4th“, “Playing Super Audio CD“). a. With the antenna on top of any stable surface.
Page 24 USB port on the front panel. terminals (EXT. IN), set “Amp Assign” (vpage 33) to “Normal”. • To connect an iPod to the AVR-4310, use the USB cable supplied with the iPod. • When you want to playback a movie file stored on the iPod, use the DENON control dock for iPod (ASD-11R or ASD-1R, sold separately) (vpage 16 “Control Dock for iPod”).
Page 25: External Controller
TRIGGER OUT jacks • When using just one surround back speaker, connect it to the left Set this to use the RS-232C connector for the DENON RF remote The TRIGGER OUT output terminal outputs a maximum 12 channel (L). controller.
Page 26: Connecting To A Home Network (Lan)
Connecting” (vpage 38). other sources. You can also control the AVR-4310 from your PC via • With the AVR-4310, it is possible to use the DHCP and Auto IP Router the Web browser. functions to make the network settings automatically.
Page 27: Connecting The Power Cord
ENGLISH Connecting the Power Cord Once Connections are Symbols used to indicate buttons in this manual Completed Button located on both the main unit Wait until all connections have been completed before connecting the BUTTON and the remote control unit power cord.
Page 28: Settings
ENGLISH Settings GUI Menu Map Symbols used to indicate buttons in this manual Button located on both the main unit MENU Pressing displays the GUI menu. From this menu, you can move Source Select (vpage 45) BUTTON and the remote control unit to various setting screens.
Page 29: Gui Menu Operation
ENGLISH GUI Menu Operation • When a TV is connected to the AVR-4310, the GUI menu, sound field Examples of GUI Menu Screen Displays parameters, etc., can be displayed on the TV. This allows you to operate the AVR-4310 and make settings on it Typical examples are described below.
Page 30: Selecting The Input Source
Selecting the input source using the Source Select menu (GUI menu) • When using with an iPod connected directly to the AVR-4310’s USB pot, select “USB/iPod” for the input [INPUT SOURCE SELECT] w Selecting the input source using the (Main remote control unit) source.
Page 31: Make The Optimal Speaker Settings, And Correct The Room Acoustics (Audyssey Auto Setup)
ENGLISH Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey Auto Setup) The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. When Using the Front Height Speakers Important information Audyssey Auto Setup Flow GExample qH GExample wH...
Page 32 Turn on the TV and subwoofer power. Setup be affected by these sounds. Change the TV input to AVR-4310 input. microphone Cell phones should be placed away from all audio electronics during the measurement process as Radio Frequency Interference (RFI) Turn on the AVR-4310 power.
Page 33 The signal output from the SURR.BACK/AMP ASSIGN speaker terminal If you set the channels you will not use beforehand, those channels of the AVR-4310 can be switched to match your speaker environment will not be measured. Therefore, you can save an amount of time Select “Measure”...
Page 34 Even though you can complete measurement with at results. remeasurement or the error message still appears, it is possible least 6 positions, it is advisable to use more than 6 (a maximum that the speakers are not connected properly. Turn the AVR-4310 save operation of 8 positions).
Page 35: Error Messages
When Performing Audyssey Auto Setup Over • Included setup microphone is not connected. • Connect the included setup microphone to the Again SETUP MIC jack of the AVR-4310. ENTER Press to select “Retry”, and then press • Not all speakers could be detected.
Page 36 ENGLISH Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey Auto Setup) Subwoofer Level Error Message and How to Adjust Check the Measuring Results and The optimal level of the subwoofer channel is 75 dB. During subwoofer level measurement (“ STEP2 : Speaker Detection” (vpage 29), Equalizer Type after Audyssey Auto Perform Audyssey Auto Setup, 1 - q), an error message is displayed when the subwoofer level is outside the 72 ~ 78 dB range.
Page 37: Making Detailed Settings (Manual Setup)
ENGLISH Making Detailed Settings Making the Speaker Settings (Speaker Setup) (Manual Setup) Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup. For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation”...
Page 38 ENGLISH Making Detailed Settings (Manual Setup) Setting items Setting contents Setting items Setting contents Speaker Configuration Surround A : Set the presence and size of the surround speakers A. Speaker Configuration Front Height : Set the presence and size of the front height speakers. (Continued) •...
Page 39 ENGLISH Making Detailed Settings (Manual Setup) Setting items Setting contents Setting items Setting contents Distance Default : Reset all distance settings to factory default. Channel Level (Continued) • Yes : Reset to the defaults. (Continued) • Speakers set to “None” in the “Speaker Configuration” (vpage 33) •...
Page 40 OFF : Do not expand signal in vertical direction. mode. vertical direction. DSP SIMULATION : Set the surround speakers to use during the DENON This setting is valid with respect to the HDMI output when using an original surround mode.
Page 41 This can be set when “Control“ is set to “ON“. controls operations of a frequencies. Power Off Control : The power of the AVR-4310 and external device turn TV that is compatible with • Small : Use of a small speaker that has inadequate playback capacity for off together.
Page 42 (LAN)”). Level FL / Level FR : Select the speaker. LAN. 2. Turn on the AVR-4310 (vpage 23 “Turning the Power On”). • –12.0dB ~ +12.0dB (0dB) : Adjust the level of each channel. AVR-4310 performs automatic network setup due to the DHCP Auto Surround Mode ON : Memorize settings.
Page 43 Address : Select when inputting by address. • If the AVR-4310 is being used connected to a network without the Name : Select when inputting by domain name. DHCP function, the network settings must be made. In this case, some uio p knowledge of networks is required.
Page 44 / tur power is turned on. Connect to broadband Internet (vpage 22) when Friendly Name Edit : The Friendly Name is the name AVR-4310 displayed using this function. on the network. Up to 63 characters can be input. The default Friendly •...
Page 45 ENGLISH Making Detailed Settings (Manual Setup) Setting items Setting contents Setting items Setting contents Volume Display Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB. Napster Account Username / Password The types of characters that can be input are as shown below. volume Absolute : Display in the range 0 (Min) ~ 99.
Page 46 • The “Volume Display” setting is applied also to the “Volume Limit” and • Picture : Set the background to a picture (DENON logo). “Power On Level” display method. • Black : Set the background to black. •...
Page 47 GSymbolsH ! # % & ‘ ( ) * + , - . / : ; < = “ > ? @ [ \ ] (Space) When using a DENON two-way remote control (RC-7000CI or RC- control connected to the RS- GNumbersH 0123456789 7001RCI, sold separately), set to “2Way Remote”.
Page 48 • then update again. • In the event of an update error during update or upgrade, turn the AVR-4310’s power off and then on Display Description again. “Update Retry” appears on the display and update restarts from the point at which update failed.
Page 49: Making The Input Settings (Source Select)
ENGLISH Making Detailed Settings (Manual Setup) Making the Input Settings Making Language Settings (Language) (Source Select) Default settings are underlined. For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 25). Set the language for display on the GUI screen. Select input source and make playback settings.
Page 50: Important Information
ENGLISH Making the Input Settings (Source Select) Input Assignments Menu Operations Important Information MENU Press uio p to move the gray About the Display of Input Sources in This Manual The GUI menu is displayed on the TV highlight to the item you want to set. screen.
Page 51 3 / D.LINK (DENON LINK) z assigned is displayed as “– – –”. z : “D.LINK” is set when the AVR-4310 is connected by DENON LINK • When control dock for iPod is used as the input source, assignment of to a DENON Blu-ray disc / DVD player (vpage 19 “Components...
Page 52 “Video Convert” to “OFF”. • When “Video Convert” is set to “OFF”, the video conversion function does not work. In this case, connect the AVR-4310 and TV with the same type of cable. See overleaf :Displaying the menu...
Page 53: Input Mode
ENGLISH Making the Input Settings (Source Select) Setting items Setting contents Changing the Input Mode and Decoding Mode i/p Scaler Analog : Use i/p scaler function for analog video signal. (Input Mode) The input source’s resolution Analog & HDMI : Use i/p scaler function for analog and HDMI video Default settings are underlined.
Page 54: Playback Mode
ENGLISH Making the Input Settings (Source Select) Setting the iPod with iPod Dock Playback Mode Changing the Input Source’s Display Name (Rename) (Playback Mode) Setting items Setting contents This can be set for the input source for which “iPod dock” is assigned at “Input Assign” ( v page 48). Rename ENTER 1.
Page 55: Still Picture
ENGLISH Making the Input Settings (Source Select) Making the Settings to Play Still Pictures Giving Names to Preset Stations (Preset Name) (Still Picture) Default settings are underlined. Default settings are underlined. Setting items Setting contents This can be set when the input source is NET/USB A1 ~ G8 This can be set when the input source is TUNER .
Page 56: Playback
Playback preparation. q Connecting the DENON control dock for iPod to the AVR- 4310 (vpage 16 “Control Dock for iPod”). w Set the iPod ® in the DENON control dock for iPod. Playing Components Turn the AVR-4310 power on. (vpage 23 “Turning the Power On“)
Page 57 There are two modes for display the contents recorded on the Fast-forwarding or fast-reversing (vpage 64) DENON ASD-11R control dock for iPod, image files can be played in iPod. the browse mode. To cue to the beginning of a track...
Page 58: Playing An Ipod ® Connected Directly To The Avr-4310'S Usb Port
Control Unit”). BUTTON and the remote control unit • Music stored on an iPod can be played on the AVR-4310 when the <BUTTON> Button only on the main unit When no control dock for iPod is connected, this operation is also AVR-4310 and iPod are connected by USB cable.
Page 59: Tuning In Radio Stations
If the desired station cannot be tuned in with auto tuning, tune it in functions may not operate. manually. preset channel. • DENON will accept no responsibility whatsoever for any loss of iPod • When tuning in stations manually, press and hold data. change frequencies continuously.
Page 60: Direct Frequency Tuning
ENGLISH Tuning in Radio Stations Default settings RDS (Radio Data System) Symbols used to indicate buttons in this manual Auto tuner presets Button located on both the main unit RDS (works only on the FM band) is a broadcasting service which A1 ~ A8 87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 / 90.1 MHz BUTTON and the remote control unit...
Page 61: Rds Search
Press three times to select “PTY”. • The AVR-4310’s Internet radio station list is created using a radio To turn the display off, press station database service (vTuner). This database service provides a If no text data is being broadcast, “NO TEXT DATA” is displayed.
Page 62 Audio Layer-3) by Napster. This service allows users to download and play pieces – of music they want to hear on the AVR-4310. Before you can use When still picture (JPEG) files are played on the AVR-4310, they MPEG-4 AAC –...
Page 63: Listening To Internet Radio
Select menu, then select “ ” (vpage 26). • On the AVR-4310, folder and file names can be displayed as titles. Any characters that cannot be displayed are replaced with Set the main remote control unit to the “NET/USB” “. (period)”.
Page 64 [A ~ G] [1 ~ 8] The selected Internet radio station is cleared. After pressing , press to select the registered preset number. To cancel the operation without clearing the station, press The AVR-4310 automatically connects to the Internet and playback begins.
Page 65: Playing Files Stored On A Computer
ENGLISH Playing Network Audio, USB Memory Devices Playing Files Stored on a Computer • When playing still picture (JPEG) files, files can also be selected Use this procedure to play music files, image files or playlists. using the operation described below. [TU d] [TU f] During playback, either press...
Page 66: Playing Files Stored On Usb Memory Devices
[SOURCE SELECT] to display the GUI Source • The AVR-4310 is equipped with two USB ports, one each on the front Select menu, then select “ ” (vpage 26). and rear panels. It is not possible to use the set with USB memory devices connected to both the ports at the same time.
Page 67 ENGLISH Listening to Napster Search From Napster Menu Registering Tracks in My Napster Library to input “Username” and “Password”. ui p to select search item or folder, then press Press while the track you wish to register is ENTER playing. Napster Account Username ENTER...
Page 68: Operations During Playback
ENGLISH Operations During Playback To Stop Symbols used to indicate buttons in this manual Button located on both the main unit During playback, either press and hold ENTER or press BUTTON and the remote control unit Adjusting the Master Volume <BUTTON>...
Page 69: Selecting Tracks
ENGLISH Operations During Playback Selecting Tracks Searching by First Letter This operation is convenient for choosing items from the menu screens During playback, either press (previous track) or for Internet radio stations or files stored on the computer. (next track). When the menu screen is displayed, press [SEARCH] twice, then press...
Page 70: Selecting The Surround Mode (Surround Mode)
ENGLISH Selecting the Surround Mode (Surround Mode) Surround Playback of 2-channel Sources q Playing Sources According to the Symbols used to indicate buttons in this manual STANDARD The mode switches as shown below each time Sources’ Audio Signal Format/ pressed. Button located on both the main unit Number of Channels (Standard : The signals are decoded in DOLBY PLgz for...
Page 71: Direct Playback
The desired mode according to the program source and viewing and automatically operates the appropriate decoder for surround The sound is output to the same channels as the input signal. situation can be selected from among 10 DENON original surround sound. modes.
Page 72: Stereo Playback
ENGLISH Selecting the Surround Mode (Surround Mode) r Stereo Playback Symbols used to indicate buttons in this manual Button located on both the main unit This is the mode for playing in stereo. The tone can be adjusted. BUTTON and the remote control unit Sound is output from the front left and right speakers and subwoofer.
Page 73: Adjusting The Sound And Picture Quality
ENGLISH Adjusting the Sound and Picture Quality (Audio/Video Adjust) For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 25). Setting items Setting contents Adjusting the Sound (Audio Adjust) Surround Parameters LFE : Adjust the low-frequency effects level (LFE). Default settings are underlined.
Page 74 ENGLISH Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Setting items Setting contents Surround Parameters Front Height : Set the Dolby PLgz Height mode to ON or OFF. Surround Parameters For multi-channel sources (Continued) (Continued) Set the decoding method for the surround back channel. •...
Page 75 ENGLISH Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Setting items Setting contents Dynamic EQ : Solves the problem of deteriorating sound quality as Audyssey Settings Tone Tone Control : Sets the tone control function ON and OFF. volume is decreased by taking into account human perception and room (Continued) Adjust the tonal quality of...
Page 76 ENGLISH Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Setting items Setting contents Dynamic Volume : Solves the problem of large variations in volume level Audyssey DSX Settings Stage Width : Adjust sound stage width when using front wide Audyssey Settings between TV, movies and other content (between quiet passages and loud (Continued)
Page 77: Adjusting The Picture Quality (Picture Adjust)
ENGLISH Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Setting items Setting contents Manual EQ Curve Copy : Copy “Audyssey Flat” curve from MultEQ XT. Audio Delay 0ms ~ 200ms (Continued) Yes : Copy. While viewing video, No : Do not copy.
Page 78: Checking The Status (Information)
ENGLISH Checking the Status (Information) Setting items Setting contents Setting items Setting contents Quick Select 1 / Quick Select 2 / Quick Select 3 / ZONE2 Quick Select MAIN ZONE Status Quick Select Shows information about settings for MAIN ZONE. / ZONE3 Quick Select The items displayed differ according to the input source.
Page 79: Other Operations And Convenient Functions
• When a BD is played with the input mode set to “Auto”, playback is performed in the DENON LINK 4th mode. When a disc other than a BD is played with the input mode set to “Auto”, playback is [INPUT automatically performed in the DENON LINK 3rd mode.
Page 80: Recording On An External Device (Rec Out Mode)
(OPTICAL/ COAXIAL) are PCM (2-channel) signals. • Digital audio signals input to the DENON LINK or HDMI connectors are not output to the REC OUT connectors, so connect using the OPTICAL or COAXIAL connectors.
Page 81: Convenient Functions
HDMI cable. When you make an HDMI connection with a TV or player compatible With this function, you can set the AVR-4310 so that the power is Set “HDMI Control” – “Control” (vpage 37) to “ON“. with AVR-4310 and HDMI control functions, you can perform the...
Page 82: Adjust The Volume Of The Speakers
ENGLISH Convenient Functions Adjust the Volume of the Speakers Saving Frequently Used Settings Symbols used to indicate buttons in this manual (Quick Select Function) Button located on both the main unit You can adjust the channel level either according to the playback BUTTON and the remote control unit sources or to suit your taste, as described below.
Page 83: Playing The Same Network Audio On Different Devices Connected In A Network (Party Mode Function)
The same network audio (Internet Radio, Media Server or iPod the same network audio as on the organizer is played. DIRECT) can be played on multiple DENON products equipped with • If there are fewer than four attendees, a device can join the party the Party Mode function and connected in a network.
Page 84: Operating A Wireless Lan-Compatible Mobile Terminal To Play Music And Still Pictures
Select a player Mobile terminal device When selecting the AVR-4310 from the mobile terminal device, the name of the AVR-4310 is displayed at “Friendly Name” (vpage 40 “Friendly Name Edit”). From the mobile terminal device, browse the media server in the same network and The following operations are possible from the mobile terminal device: •...
Page 85: Operating The Avr-4310 With A Browser (Web Control Function)
Normally, there is a change to the latest information each time you operate. When operated from the main unit, click because For example, if the IP address of AVR-4310 is “192.168.100.33”, the screen is not updated. enter “http://192.168.100.33”. z8: Click to return to the top menu.
Page 86: Various Memory Functions
ENGLISH Convenient Functions GExample 2H Setup menu screen GExample 4H PDA menu screen GExample 6H Dedicated iPod Touch screen When accessed from the iPod Touch browser, an optimized operation screen is displayed. z18: Select to operate each zone. NOTE You cannot change setup menu operations and zone name on the PDA menu screen.
Page 87: Playing In Zone2/Zone3 (Multi-Zone Function)
The source selected for ZONE2 is also output from the recording output connectors. The video signals of the AVR-4310’s ZONE2 video output terminal are The audio signals of the AVR-4310’s ZONE2 and ZONE3 audio output played by the ZONE2 TV.
Page 88: Playback
Output” and “w Zone Playback by Audio Output (PRE OUT)”. Operation on the main unit <BUTTON> Button only on the main unit Turn on the AVR-4310’s power. [BUTTON] <ZONE2/3/ REC SELECT> Button only on the remote control unit P ress...
Page 89: Menu Operation
Press to select the menu to be set or uio p The sleep timer is also canceled when the AVR-4310 is set to the operated. standby mode or the ZONE2 or ZONE3 power is turned off. Calling the Settings Out...
Page 90: Operating The Connected Devices By Remote Control Unit
In the “MAIN”, “TUNER”, “iPod” and “NET/USB” modes, when : MAIN / ZONE2 / ZONE3 / ZONE4 z / MACRO the remote ID is set, the AVR-4310 can be used independently even in an environment containing multiple DENON amplifiers. (vpage : Tuner (FM / AM) 90 “Setting the Remote ID”)
Page 91: Presetting
ENGLISH Operating the Main Remote Control Unit Blu-ray Disc Player / HD DVD Player / DVD Player / CD Player / CD Recorder Presetting DVD Recorder EL Display The included main remote control unit can be preset to operate EL Display EL Display devices of various brands.
Page 92 ENGLISH Operating the Main Remote Control Unit Digital Video Recorder / Video cassette Recorder / Set top box for Satellite / Cable / IP TV / HD TV Cassette Deck EL Display EL Display EL Display EL Display EL Display EL Display Device select Device select...
Page 93 ENGLISH Operating the Main Remote Control Unit iPod NET/USB Tuner (FM/AM) EL Display EL Display EL Display EL Display EL Display EL Display Device select Device select Device select button button button A ~ G Preset memory block selection A ~ G Preset memory block selection 1-track/All-track repeat play Switching picture...
Page 94: Setting The Remote
When using multiple DENON AV receivers in the same room, make If your AV devices are of a brand other than DENON or if they cannot this setting so that only the desired AV receiver operates. be operated with the preset memory function, their remote control [DEVICE signals can be transfered to stored in the AVR-4310’s main remote...
Page 95: Macro Function
ENGLISH Operating the Main Remote Control Unit Calling out MACRO Function [MAIN] • With some remote control units, the signals cannot be learned or the Press , to select “MACRO”. This function lets you register a series of operations at a single device will not operate properly even when the signals have been button.
Page 96: Setting The Time The Backlight Stays Lit
ENGLISH Operating the Main Remote Control Unit Signal Setting the Time the Backlight Stays Lit Specifying the Zone Used with the Main transmission Remote Control indicator Press and hold in [RC SETUP] for at least 3 seconds. SAT/CBL] The signal transmission indicator flashes twice. [DEVICE [MAIN] When the...
Page 97: Resetting The Main Remote Control Unit
ENGLISH Operating the Main Remote Control Unit MACRO Function Resetting the Main Remote Control Unit [RC SETUP] Press and hold in for at least 3 seconds. Learning Function The signal transmission indicator flashes twice. Resetting Button by Button Press , in that order. [RC SETUP] Press and hold in for at least 3 seconds.
Page 98: Operating The Sub Remote Control Unit
• The sub remote control unit can also be used for multi-zone, so you ZONE ON Power turned on ( b 1) can use it to control the AVR-4310 from other rooms. INPUT SOURCE SELECT Input source selection • The operations listed below can be performed with the sub remote CHANNEL + / –...
Page 99: Switching Zones
Setting the Remote ID Remote Control Unit is Used Use this procedure to select the zone to be operated by the sub When using multiple DENON AV receivers in the same room, make this (ZONE SELECT LOCK Mode) remote control unit.
Page 100: Other Information
Dolby Pro Logic g is a matrix decoding technology developed by Dolby Dolby Pro Logic gz introduces a new dimension to Home Entertainment The AVR-4310 is equipped with a digital signal processing circuit that Laboratories. through the addition of a pair of front height channels. Compatible with...
Page 101 ENGLISH Explanation of Terms Audyssey Dynamic Surround Expansion™ (DSX) DTS 96/24 DTS Surround Realistic reproduction of sound relies on the ability of audio systems DTS 96/24 is a digital audio format enabling high sound quality to match human hearing performance. Three key requirements are: playback in 5.1-channels with a sampling frequency of 96 kHz and 24 DTS Digital Surround (i) frequency response;...
Page 102 A copyright-protected technology developed by Microsoft. DENON LINK 4th uses the clock of the AV amplifier connected by Content providers are using the digital rights management technology DENON LINK to achieve HDMI signal transfer with little jitter when for Windows Media contained in this device (WM-DRM) to protect playing BD.
Page 103: Surround Modes And Parameters
ENGLISH Surround Surround Modes and Parameters Signals and adjustability in the different modes Channel output Parameter (default values are shown in parentheses) Surround Mode Front Surround Surround Front Wide Front Height D. COMP AFDM Surround Center Subwoofer Cinema EQ. Mode Room Size Effect Level Back L/R...
Page 104 ENGLISH Surround Signals and adjustability in the different modes Parameter (default values are shown in parentheses) NEO:6 MUSIC Surround Mode PRO LOGIC g/gx MUSIC mode only EXT. IN only mode only Dynamic Delay Time Subwoofer Front Height Tone Control MultEQ XT Dynamic EQ RESTORER Volume...
Page 105 ENGLISH Surround Differences in Surround Mode Names Depending on the Input Signals Button Input signals DTS-HD DOLBY DOLBY DIGITAL MULTI CH PCM Super Audio CD WMA (Windows LINEAR DTS-HD DOLBY DOLBY Note Media Audio) / DTS-HD DTS ES DTS ES DOLBY DOLBY DOLBY...
Page 106 ENGLISH Surround Button Input signals DTS-HD DOLBY DOLBY DIGITAL MULTI CH PCM Super Audio CD WMA (Windows LINEAR DTS-HD DOLBY DOLBY Note Media Audio) / DTS-HD DTS ES DTS ES DOLBY DOLBY DOLBY DOLBY Surround Mode ANALOG PCM / High DOLBY DIGITAL DIGITAL EX...
Page 107 ENGLISH Surround Button Input signals DTS-HD DOLBY DOLBY DIGITAL MULTI CH PCM Super Audio CD WMA (Windows LINEAR DTS-HD DOLBY DOLBY Note Media Audio) / DTS-HD DTS ES DTS ES DOLBY DOLBY DOLBY DOLBY Surround Mode ANALOG PCM / High DOLBY DIGITAL DIGITAL EX...
Page 108 ENGLISH Relationship Between Video Signals and Monitor Output MAIN ZONE MONITOR OUT Input Signals Output Signals GUI menu displayed Video Convert HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO ON/OFF Only the GUI menu is displayed VIDEO VIDEO VIDEO...
Page 109: Troubleshooting
0.5 treatments etc, please reconnect once again. GGeneralH seconds. Even applying • The AVR-4310 amplifier circuit has failed. Switch off the power – Symptom Cause / Countermeasure Page power, the power and please contact the DENON service adviser.
Page 110 Cause / Countermeasure Page Symptom Cause / Countermeasure Page No picture appears. • Check the connections of the AVR-4310’s video output terminals 14, 15 iPod cannot • Connect to the terminal to which “iPod dock” was assigned and 26, 48 and the TV’s input terminals.
Page 111: Restoring All The Settings To As They Were At The Time Of Purchase (Resetting The Microprocessor)
• Files are stored in a non-compatible format. Record the files in a 57 , 58 Library”. In this way, the playlist can be played in AVR-4310. compatible format. Cannot delete Tracks, • Cannot be done with AVR-4310. Delete from PC application.
Page 112: Specifications
ENGLISH Specifications Audio section Tuner section [FM] [AM] • Power amplifier (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10 Rated output: Front: Receiving Range: 87 .5 MHz ~ 108.0 MHz 522 kHz ~ 1611 kHz 130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) Usable Sensitivity: 1.0 µV (11.2 dBf) 20 µV...
Page 113 31224 Dayton 31158 Global Link 31224 Kennex 30770, 30713, 30898 Audiosonic 30690 Daytron 31040 Global Sphere 31152 Kenwood 30490, 30534, 30682 Denon 32258 Audix 30713 30831 Go Video 30783, 30869, 31099 Kiiro 30770 Integra 32147 Autovox 30713 Decca 30770, 31115...
Page 114 Mirror 30752 Radiotone 30713 Sound Color 31233 Umax 30690, 31151 E:max 31321 30695, 30675, 30713, 30788, Mitsubishi 30521, 30713, 31403 30522, 31759 Soundwave 30713, 30783, 31530 Ellion 31421 United 30884, 31115, 31152, 31228, Mizuda 30770 30490 Standard 30831, 30651, 30788, 30898 Eltax 31321 31233, 31367...
Page 115 Acoustic Research 40420 CD Recorder 20081, 20037, 20042, 20089, Miro 40000 Hitachi Crown 20278, 20037 20240, 20593 Advantage 40032 Mission 40157 Denon 42868, 43868 Hoeher 20278, 20642 Cybernex 20240 40157 40000, 40032, 40468, 40087, Modulaire Sony 40100 Hornyphon 20081 40179, 40420...
Page 116 20081, 20045, 20043, 20742, Dish Network Magnadyne 20081 Palladium 20037, 20348 Sei-Sinudyne 20081 Toshiba 00775 21008 System 20226, 20225, 20837, 21162, Magnasonic 20278, 20593 Seleco 20037 Panasonic Totevision 20037, 20240 01075 21262 Magnavox 20081, 21593 Semp 20045 Pathe Cinema 20043 Tradex 20081 Dream Multimedia...
Page 117 20029 10556, 10037, 10668, 11037, Daytron Akito 10037 10178, 10374 Basic Line 10218, 10455, 10009, 10163, Cascade 10037, 10009 Denon 20076, 20371, 22471 10037, 10714, 10668, 11037, De Graaf 10548, 10163, 10208 10217, 10374 Casio 10037 Garrard 20308 10264, 10218, 10009, 10163,...
Page 118 10037, 10610, 10370, 10009, Easy Living 10877, 11217, 11248 Hampton 10217 Ingersol 10009 Kontakt 10487 Friac 10499 Ecco 10773 Hanimex 10218 Inno Hit 10218, 10009, 10217 Korpel 10037 Frontech 10264, 10009, 10163, 10217 10556, 10037, 10625, 10714, 10037 Innowert 10865, 11298 Korting 10370 Fujimaro...
Page 119 10556, 10037, 10264, 10218, 10037, 10714, 10668, 11037, Manesth 10037, 10264, 10035, 10217 Musikland 10218 Profex 10361, 10009, 10163 Osaki 10217, 10374 Roadstar 10715, 10264, 10218, 10009, 10037, 10668, 11037, 10778, Mx Onda 11498 Profi 10009 Manhattan 10418 Osio 10037 10876, 11267 Myryad 10556...
Page 120 10037, 10668, 10195, 11037, Shintoshi 10037 Sunwood 10037 Teletech 10037, 10668, 11037, 10009 Yokan 10037 10361, 10264, 10370, 10036, 10037, 10264, 10370, 10218, Shivaki 10037, 10443 Superla 10217 Teleton 10036, 10217 10618, 10808, 10631, 10512, Yoko 10009, 10217 Universum 10480, 10418, 10362, 10346, Siarem 10163 SuperTech...
Page 121 Luker 11982 Weltstar 30713 Hitachi 11904 Telefunken 20278 Audioline 01672 Luxor 30713, 30884 Weltstar 11037 Hypson 20037 Telefunken 10074 Austar 00497, 00863 Luxor 11037 Wharfedale 31115 Internal 20278 Thomas 11904 Axiel 00710 Matsui 30713, 30884 Internal 11909 Thomson 20278 Axil 01413, 01457, 01659, 01993 Matsui 11037...
Page 122 01111, 00173, 00125, 00299, Daewoo 01111, 00713, 01296, 01743 Eutra 00740 Lodos 01284 Nikko 00723, 00200, 00713 Hirschmann 00442, 00710, 00740, 00882, 01993 Expressvu 00775 Logik 01284 Noda Electronic 01704, 01705 01085, 01232, 01412 01127, 00853, 00723, 00873, Dantax 01626 Fenner 00713 Logix...
Page 123 01099, 01100, 01195, 01197, Radiola 00200 Sky Television 01014 Xcom 00123 Taihan 00778 Telestar 01251, 01334, 01610, 01626, 00847, 00123, 00713, 01214, Radix 00394, 00882, 01113, 01317 Sky XL 01251, 01412 Telewest 01068 01672 Xsat 01323 00143, 00392, 00566 Sky+ 01175 Torx 00003...
Page 124 : Los códigos vienen preprogramados de fábrica. *[ ] : Vooringestelde codes bij hey verlaten van de fabriek. *[ ] : Förinställda koder har ställts in vid transporten från fabriken. DVD Player DENON [32134] Video Cassette Recorder Tivo [20739] Television SONY [10810] Satellite Set Top Box...
Page 125 D&M Holdings Inc. Printed in China 5411 10320 003DA...

Denon AVR-4310 Owner's Manual

Getting Started

Flow of Operations through Playback

Cautions on Handling

Cautions on Installation

Preparations

Part Names and Functions

Connections

Important Information

Installing / Setting the Speakers

Speaker Connections

Connecting Devices

Connecting the Power Cord

Once Connections Are Completed

Settings

GUI Menu Map

GUI Menu Operation

Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey Auto Setup)

Acoustics (Audyssey Auto Setup)············································· 27

Making Detailed Settings (Manual Setup)

Making the Input Settings (Source Select)

Playback

Important Information

Playing Components

Tuning in Radio Stations

Playing Network Audio, USB Memory Devices

Operations During Playback

Selecting the Surround Mode (Surround Mode)

Adjusting the Sound and Picture Quality

(Audio/Video Adjust)

Checking the Status (Information)

Other Operations and Convenient Functions

Other Operations

Convenient Functions

Playing in ZONE2/ZONE3 (Multi-Zone Function)

Audio Output

Video Output

Playback

Quick Select Function·································································85

Menu Operation

Sleep Timer Function

Operating the Connected Devices by Remote Control Unit

Operating the Main Remote Control Unit

Operating the Sub Remote Control Unit

Other Information

Troubleshooting

Restoring All the Settings to as They Were at the Time of Purchase (Resetting the Microprocessor)

Purchase (Resetting the Microprocessor)·······························107

Specifications

Quick Links

Need help?

Questions and answers

Related Manuals for Denon AVR-4310

Summary of Contents for Denon AVR-4310

Table of Contents