Denon AVR-4310 Owner's Manual page 38

Av surround receiver
Hide thumbs Also See for AVR-4310:
Table of Contents

Advertisement

ENGLISH
Making Detailed Settings (Manual Setup)
Setting items
Speaker Configuration
Surround A : Set the presence and size of the surround speakers A.
(Continued)
Large : Use of a large speaker that can adequately playback low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the surround speakers A are not connected.
When "Surround A" is set to "Large", "Front Height" and "Front Wide"
can be set to "Large".
When "Surround A" is set to "None", "Surround B", "Surround Back",
"Front Height" and "Front Wide" can automatically set to "None".
Surround B : Set the presence and size of the surround speakers B.
Large : Use of a large speaker that can adequately playback low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the surround speakers B are not connected.
When "Surround B" is set to "Large", "Front Height" and "Front Wide"
can be set to "Large".
When "Surround B" is set to "None", "Surround A", "Surround Back",
"Front Height" and "Front Wide" can automatically set to "None".
Surround Back : Set the presence, size and number of surround back
speakers.
Large : Use of a large speaker that can adequately playback low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the surround back speakers are not connected.
2spkrs : Use two surround back speakers.
1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
When the "Amp Assign" setting (vpage 33) is other than "Normal",
you cannot make the "Surround Back" setting.
Even when the Surround Back Speaker setting is other than "None",
sound may not be emitted from the surround back speaker, depending
on the playback source. In this case, "Surround Parameters" – "Surround
Back" setting other than "OFF" (vpage 70).

Main remote control
operation buttons
Setting contents
:Displaying the menu
Cancel the menu
Setting items
Speaker Configuration
Front Height : Set the presence and size of the front height speakers.
(Continued)
Large : Use of a large speaker that can adequately playback low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the front height speakers are not connected.
When the "Amp Assign" setting (vpage 33) is other than "Front
Height", you cannot make the "Front Height" setting.
Front Wide : Set the presence and size of the front wide speakers.
Large : Use of a large speaker that can adequately playback low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the front wide speakers are not connected.
When the "Amp Assign" setting (vpage 33) is other than "Front
Wide, you cannot make the "Front Wide" setting.
Bass Setting
Subwoofer Mode : Select low range signals to be reproduced by
Settings for subwoofer and
subwoofer.
LFE signal range playback.
LFE : The low range signal of the channel set to "Small" speaker size is
added to the LFE signal output from the subwoofer.
LFE+Main : The low range signal of all channels is added to the LFE
signal output from the subwoofer.
This can be set when "Speaker Configuration" – "Subwoofer" (vpage
33) is set to "Yes".
Play music or a movie source and select the mode offering the strongest
bass.
Select "LFE+Main" if you want the bass signals to always be produced
from the subwoofer.
LPF for LFE : Set LFE signal playback range.
80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
Meters / Feet : Set the unit of distance.
Distance
Set distance from listening
Step : Set the minimum variable width of the distance.
position to speakers.
0.1m / 0.01m
Measure
beforehand
the
1ft / 0.1ft
distance from the listening
position to each speaker.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Setting contents
See overleaf
:Return to previous menu

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents