Amp Assign / Multi-Zone Connections And Operations; Multi-Zone Settings With The Amp Assign Function - Denon AVR-2808 Owner's Manual

Amp Assign / Multi-zone Connections and
Operations
The AVR-2808CI is compatible with the following types of playback:
• Multi-zone playback (ZONE2 & ZONE3)
• Bi-amp playback (front speakers)
NOTE
• For bi-amp playback, use speakers compatible with that type of connection.
• When conducting bi-amp playback, remove the short-circuiting boards (or wires) from the speaker
terminals.

Multi-zone Settings with the Amp Assign Function

The amp assign function lets you assign the amplifiers for the different channels built into the AVR-2808CI
to the speaker outputs for the different zones.
Select the desired playback environment from among "Setting 1" to "Setting 4" , then set the corresponding
"Amp Assign" mode at menu "Manual Setup" – "Option Setup" – "Amp Assign" (vpage 31).
Connect the speakers as described at "Amp Assign mode settings and speakers connected to the various
speaker terminals" .
"Setting 3" is possible to switch the Amp Assign mode between the 5.1-channel mode and 2-channel
mode without changing the speaker connections.
 
Setting 1 :
Multi-zone playback
F
• 5.1-channel playback + ZONE2 or ZONE3 stereo playback
• 5.1-channel playback + ZONE2 + ZONE3 monaural playback
Main zone ZONE2
FL SW C FR
Z2L Z2R
+ +
Stereo
Z2L Z2R
+ +
SL 5.1ch SR
Z2
+ +
Mono
"STEREO" or "MONO" depends on the setting at menu "Manual Setup" – "(select the zone)" – "Zone
Setup" – "Channel" (vpage 30).
n Amp Assign mode setting and speakers connected to the various speaker
terminals
Speaker terminal
FRONT
R L
Amp Assign mode
ZONE2
ZONE3
FR FL
ZONE2/3-MONO
ZONE3
Amp Assign mode:
Z3L Z3R
ZONE2 (Default)
Z3L Z3R
ZONE3
Stereo
Z3
ZONE2/3-MONO
Mono
SURR. BACK /
SURR
AMP ASSIGN
CENTER
R L R
Z2R
Z3R
C SR SL
Z3
(MONO)
L
Z2L
Z3L
Z2
(MONO)