Denon AVR-4310 Owner's Manual page 45

Setting items
Napster Account Username / Password
The types of characters that can be input are as shown below.
Set or change Username
and Password (vpage 62
GLower case charactersH abcdefghijklmnopqrstuvwxyz
"Listening to Napster").
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! # " $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜ (Space)
GNumbersH 0123456789
• You can change the character type when you press
during character input.
• The password may not contain underscores ( _ ).
Network Information Friendly Name / DHCP= ON/OFF / IP Address / MAC Address
Display network information.
Making the Multi-zone Settings (Zone Setup)
Set the audio to playback with multi-zone (ZONE2, ZONE3).
Setting items
Bass –10dB ~ +10dB (0dB)
Adjust low frequency range
(bass).
Treble –10dB ~ +10dB (0dB)
Adjust high frequency range
(treble).
HPF OFF : The low range is not attenuated.
Make settings for cutting ON : The low range is attenuated.
the low range to reduce
distortion in the bass.
Lch Level –12dB ~ +12dB (0dB)
Adjust the left channel
The "Lch Level" can be set when "Channel" (vpage 41) is set to
output level.
"Stereo".
Rch Level –12dB ~ +12dB (0dB)
Adjust the right channel
The "Rch Level" can be set when "Channel" (vpage 41) is set to
output level.
"Stereo".
Channel Stereo : Select stereo output.
Set the signal output from Mono : Select mono output.
multi-zone.
When "Amp Assign" (vpage 33) is set to "ZONE (MONO)", the
"Channel" setting is automatically set to "Mono".
Main remote control
operation buttons
Setting contents
[SEARCH]
Default settings are underlined.
Setting contents
:Displaying the menu
Cancel the menu
Setting items
Volume Display
Set how volume is
displayed.
Volume Level
Set the volume output level.
MENU
or
Volume Limit
Make a setting for maximum
volume.
Power On Level
Define the volume setting
that is active when the
power is turned on.
Mute Level
Set the amount of attenuation
when muting is on.
:Moves the cursor
(Up/Down/Left/Right)
Making Detailed Settings (Manual Setup)
Setting contents
Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.
Absolute : Display in the range 0 (Min) ~ 99.
• The "Volume Display" setting is applied also to the "Volume Level",
"Volume Limit" and "Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Variable : Volume adjustment enabled by main unit and remote
controller.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amp.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amp.
When "Amp Assign" (vpage 33) is set to "ZONE2", "ZONE3" or
"ZONE (MONO)", the "Volume Level" setting is automatically set to
"Variable".
OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
Can be set when the multi-zone "Volume Level" setting (vpage 41)
is "Variable".
Last : Use the memorized setting from the last session.
– – – (0) : Always use the muting on condition when power is turned on.
–80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
Can be set when the multi-zone "Volume Level" setting (vpage 41)
is "Variable".
Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
:Confirm the setting :Return to previous menu
ENGLISH