Resetting The Main Remote Control Unit - Denon AVR-4310 Owner's Manual

Resetting the Main Remote Control Unit

Learning Function
Resetting Button by Button
n
1
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
2
[9] [7] [6]
Press , and , in that order.
The signal transmission indicator flashes twice.
3
Press the button you want to reset twice.
The signal transmission indicator flashes twice.
n Resetting by Device Mode
1
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9] , [7] and [6] , in that order.
The signal transmission indicator flashes twice.
3
Press [DEVICE SELECTOR] for the device you want to
reset twice.
The signal transmission indicator flashes twice.
MACRO Function
1
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
2
[9] [7] [8]
Press , and , in that order.
The signal transmission indicator flashes twice.
3
Press [MACRO] ( 1 ~ 3 ) you want to reset.
4
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
Punch-Through Function
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9] , [8] and [4] , in that order.
The signal transmission indicator flashes twice.
3
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
All Settings
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
[9] [8] [1]
Press , and , in that order.
The signal transmission indicator flashes 4 times.
All the settings are restored to their defaults.
ENGLISH
Operating the Main Remote Control Unit