Table of Contents
Advertisement
ENGLISH
Other Operations
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<ZONE2/3 / REC SELECT>
<SOURCE SELECT>
[
MAIN]
[SLEEP]
Recording on an External Device
(REC OUT mode)
BUTTON
You can listen to one program source while recording a different
<BUTTON>
program source.
[BUTTON]
1
Press
<ZONE2/3 / REC SELECT>
"ZONE2 SOURCE" is shown on the display.
2
Turn
<SOURCE SELECT>
is displayed.
The "
" indicator lights.
ZONE2 SOURCE
ZONE2 TUNER
RECOUT NET/USB
RECOUT V.AUX
3
<SOURCE SELECT>
Turn
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment's
b
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
b
55).
5
Start recording.
b
For operating instructions, refer to the respective equipment's
operating instructions.
<ZONE2/3 / REC SELECT>
•
To cancel, press
SELECT>
until "ZONE2 SOURCE" is displayed.
•
Make a test recording before starting the actual recording.
•
Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
•
Digital audio signals input to the DENON LINK or HDMI connectors
are not output to the REC OUT connectors, so connect using the
OPTICAL or COAXIAL connectors.
•
Sources selected with the REC OUT mode are output from ZONE2
as well.
•
In the REC OUT mode, the remote control unit's ZONE2 mode
buttons cannot be operated.
NOTE
•
Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
•
Input sources for which "Delete" is selected at "Source Delete"
(vpage 42) cannot be selected.
.
until "RECOUT SOURCE"
····
ZONE2 NET/USB
····
RECOUT SOURCE
to choose the input source
<SOURCE
, then turn
Hide quick links:
Advertisement
Table of Contents
