Selecting The Input Source - Denon AVR-4310 Owner's Manual

ENGLISH
GUI Menu Operation

Selecting the Input Source

There are three ways to select the input source, as described below.
q Selecting the input source using the Source Select menu (GUI menu)
w Selecting the input source using the
e Selecting the input source using the
q Using the Source Select Menu
• The input source can also be selected using the source selection menu.
• Switch the main remote control unit to the "MAIN" or "MACRO" mode when performing this operation
(vpage 86 "Operating the Main Remote Control Unit").
If the main remote control unit is in "ZONE2", "ZONE3" or "ZONE4" mode, the "Source Select" menu
[SOURCE SELECT]
will not be displayed when
1
Press [SOURCE SELECT] .
Display the "Source Select" menu.
SOURCE SELECT
Source DVD
q
Recent
w
Video
Player
e
Network
Tuner
q Input Source : The name of the highlighted input source is displayed.
w Recently used sources : The recently used input sources (up to 5) are displayed.
e Icons for the input sources in the different categories are displayed.
Video :
(SAT/CBL), (TV),
Player :
(HDP), (DVD),
Network :
(Favorites), (Internet Radio),
Tuner :
(FM/AM)
2
Use uio p to select the input source icon, then press
The input source is set and the source selection menu is turned off.

[INPUT SOURCE SELECT]
(Main remote control unit)
<SOURCE SELECT>
(Main unit)
is pressed.
The currently selected input source
is highlighted.
Move
Enter
" " is displayed when using
a Control dock for iPod.
(VCR), (DVR), (V.AUX)
(CD), (PHONO)
(Media Server), (USB/iPod),
ENTER
.
• Use the device selection buttons on the main remote control unit to set the device to be operated
beforehand.
• When using with an iPod connected directly to the AVR-4310's USB pot, select "USB/iPod" for the input
source.
• Input sources that are not going to be used can be set ahead of time. Make this setting at "Source
Delete" (vpage 42).
• To turn off the source selection menu without selecting an input source, press
again.
w Operating on the Main Remote Control Unit
[INPUT SOURCE SELECT]
Press
The desired input source can be selected directly.
b To operate the AVR-4310 using the main remote control unit,
set the remote control unit to the "MAIN" mode (vpage
86 "Operating the Connected Devices by Remote Control
Unit").
VCR/DVR
b Pressing the button and the
on the main remote control unit will switch between the
following.
VCR/DVR VCR
:
CD/PHONO
: CD
e Operating on the Main Unit
<SOURCE SELECT>
Turn
b If "ZONE2/3/ Rec Select", "Video Select" or "Tuning Preset"
mode is selected for the input source, press
<SOURCE SELECT>
before turning the
(Napster)
.
CD/PHONO
button
DVR
PHONO
.
<SOURCE>
.
[SOURCE SELECT]