Amp Assign / Multi-Zone Connections And Operations; Multi-Zone Settings With The Amp Assign Function - Denon AVR 689 - AV Receiver Owner's Manual

ENGLISH

Amp Assign / Multi-zone Connections and Operations

The AVR-689 is compatible with the following types of playback:
• Multi-zone playback (ZONE2)
• Bi-amp playback (front speakers)
NOTE
• For bi-amp playback, use speakers compatible with that type of connection.
• When conducting bi-amp playback, remove the short-circuiting boards (or wires) from the speaker
terminals.

Multi-zone Settings with the Amp Assign Function

The amp assign function lets you assign the amplifiers for the different channels built into the AVR-689 to
the speaker outputs for the different zones.
Select the desired playback environment from among "Setting 1" to "Setting 3", then set the corresponding
"Amp Assign" mode at "System Setup" – "Option Setup" – "Amp Assign" (vpage 28).
Connect the speakers as described at "Amp Assign mode setting and speakers connected to the various
speaker terminals".

Setting 1 :
Multi-zone playback
F
5.1-channel playback + ZONE2 stereo playback
Main zone ZONE2
FL SW C FR
Z2L Z2R
+
SL SR
5.1ch
Stereo
n Amp Assign mode setting and speakers connected to the various speaker
terminals
Speaker terminal
FRONT
Amp
R L
Assign mode
ZONE2 FR FL
Amp Assign mode:
ZONE2 (Default)
SURROUND BACK/
SURROUND
AMP ASSIGN
CENTER
R L R
C SR SL Z2R
L
Z2L