Caller Id (Standard On All Co Lines); Caller Identification Table - Callback Feature - Vertical Edge 120 User Manual

Caller ID (Standard on all CO Lines)

This telephone company feature requires a Caller ID (CID) service
subscription from the telephone company.
The DX-120 system will receive Type 1 Caller ID data from the
telephone company on all outside lines and will display this data on
the LCD.
Operation – Options at a Digital Speakerphone
1. When an outside line with CID data has been answered, the left
LCD Interactive button can be used to toggle the displayed data
between Name received and Number received. An example
follows:
2. Press the Left Interactive button to view the telephone number:
3. Press the Left Interactive button to return to the name display.
Caller Identification Table – Callback
Caller ID information for one hundred calls is stored in a CID Table.
You can review all call data, dial a stored number, or delete call data.
Operation
1. While the extension is idle (no active calls), press the CID Table
code FEATURE
2. Input the attendant extension password.
3. Press [show]. The display shows:
4. Use the "+" (up) and "
Caller ID Table. "+" reviews the list from the most recent. "
reviews the list from the oldest recorded.
4.1. Each logged call has three screens that may be viewed:
Name, Number, Time and Date.
Page 50
LINE 5
JAMES SCOTT
LINE 5
8135551401
.
CID CALL TABLE
USE VOL +/- KEYS
-
" (down) Volume buttons to go through the
Edge 120 Digital Executive Telephone User Guide
00:44
00:44
FEATURE
-
"