Automatic Redial; Feature; Call Operator/Attendant; Conference, Meet Me - Vertical Edge 120 User Manual

Digital executive telephone
Hide thumbs Also See for Edge 120:
Table of Contents

Advertisement

Automatic Redial

You can use Automatic Redial (AR) to dial the last number you dialed.
The system will automatically dial the number and then wait for a
predetermined time for the call to be answered. If the call is not
answered during this time, the system will hang up and then try the
call again. The number of attempts the phone will make is designated
in the system programming.
Operation
1. When you place a call and receive a busy signal, hang up.
2. Press FEATURE

Call Operator/Attendant

The extension that is programmed as the Attendant may receive
multiple internal calls via the programmed Operator Code. The
Operator Code is "0" at default.
Operation
To call the attendant (operator), press

Conference, Meet Me

Conference is used to join telephone connections together. Meet Me
Conference simplifies the setup process by assigning eight separate
conference locations that are joined by dialing the location number (4
parties maximum). Callers can be transferred easily to these locations.
Users may simply dial the location number. Outside parties can join
the conference via the automated attendant simply by dialing the
location number at the auto attendant greeting.
Operation – Transfer a Caller to a Meet Me Conference
1. While connected to another extension or outside line, press
TRANSFER.
2. Dial the Meet Me Conference destination for this call (390-397).
3. Hang up to complete the transfer.
Operation – Join a Meet Me Conference
1. Dial the Meet Me Conference destination to join (390-397).
2. Hang up when finished.
Page 8
.
Edge 120 Digital Executive Telephone User Guide

FEATURE

.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents