Roland JUNO-Di Editor Owner's Manual page 20

EFFECTS Parameters
Parameter Range
PERFORM,
MFX1–3 SOURCE
1–16
PERFORM,
CHORUS SOURCE
1–16
PERFORM,
REVERB SOURCE
1–16
If you've specified a part number as the MFX SOURCE, CHORUS SOURCE, or REVERB SOURCE
If you specify a part number as a Source so that the settings of the patch or rhythm set will be used, those settings will be shown in the effect
setting screen of the performance, and can be edited.
If you want to keep the changes you made, save the settings of the patch or rhythm set (p. 24, p. 45). Then you must also save the settings of the
performance (p. 57).
20
Explanation
Multi-effect parameter settings used by the performance
PERFORM: Use the multi-effect settings of the performance
1–16: Use the multi-effect settings of the patch or rhythm set assigned to the specified part
Chorus parameter settings used by the performance
PERFORM: Use the chorus settings of the performance
1–16: Use the chorus settings of the patch or rhythm set assigned to the specified part
Reverb parameter settings used by the performance
PERFORM: Use the reverb settings of the performance
1–16: Use the reverb settings of the patch or rhythm set assigned to the specified part