Midi; Setting The Midi Channels; Setting The Midi Clock; Midi Layer Operations - Denon FN-X1700 Owner's Manual

MIDI

This unit comes with USB MIDI input/output and 5-pin DIN MIDI
output functions.
These functions support the MIDI control functions of almost all the
controls as well as the MIDI clock.

Setting the MIDI channels

1
UTILITY/–USB A/USB B
Press the
2
EFX SELECT
Using the control (EFX2), select MIDI
Setting MIDI INPUT CH or MIDI OUTPUT CH.
Set the MIDI channels.

Setting the MIDI clock

Using the EFX SELECT control (EFX2), output the MIDI clock which
is synchronized with the BPM value set. (60 to 300 BPM)
1 MIDI CLOCK START/STOP
Press the
2
The MIDI clock is output from the USB MIDI and
MIDI output terminals. The LED in the
START/STOP
button lights.
14

MIDI layer operations

The unit incorporates a MIDI layer function for the input channels.
This function controls the external devices and software as the MIDI
controller.
1
MIDI layer selector
Press the
rings light up blue, and the MIDI layer operations are
performed.
2
The MIDI commands corresponding to the operations
button.
using the panel controls are output. The operation are
not reflected in the DN-X1700. The MIDI signals are
received, and the LEDs light up or go off.
• MIDI output operation block
Channel isolator EQ
channel EFX SEND 1, 2
Channel Fader
• MIDI input operation block
channel level meter
The
CUE
buttons;
3
When the
button.
EQ control
again, the
MIDI layer operations are ended. The operations are
reflected in the DN-X1700 without being output to the
MIDI CLOCK MIDI output terminals.
4
If, at the completion of the MIDI layer operations,
the positions of the
(HI, MID, LOW) and Channel Fader differ from the
internal statuses of the DN-X1700, the DN-X1700 locks
its internal statuses without reflecting the positions of
the controls. While these statuses are locked, the
control
rings flash.
5
When a control whose status is locked is operated,
the lock screen appears, and the lock icon and lock
position (red line) are displayed.
6
When the control matches the locked position, the
lock is released, and the operations are reflected in the
DN-X1700.
EQ control
buttons. The
(HI, MID, LOW) controls;
CUE
buttons; buttons;
channel EFX SEND 1, 2
;
button display
MIDI layer selector
button is pressed
rings change to amber, and the
channel isolator EQ
controls
EQ