Table of Contents
Advertisement
チャンネル入力ソース
Channel input source
選択つまみ
select knob
MIC1/2 LEVEL
Power operation switch
トラック
Track select
選択つまみ
SHIFT
knob
PANEL
チャンネル/マスター
Channel/master
レベルメーター
level meter
GSetting valueH
10 msec
9 msec
8 msec
7 msec
6 msec
5 msec
4 msec
3 msec
– msec
– msec
GExampleH
3 msec
4 msec (Default)
MIDI command input/output
BOOTH ASSIGN
電源スイッチ
This unit supports USB MIDI output. Almost all MIDI control functions are supported.
SHIFT
Setting the MIDI command transmission
interval time
Depending on the computer specifications and OS type, the computer
may not be able to receive the MIDI commands transmitted from this
unit correctly.
In this case, set the MIDI command transmission interval time to a
larger value using the following operation. (The larger the value, the
slower the control response.)
1
Press
the
simultaneously pressing
The power switches on, the channel/master level meter lights,
and the unit switches to the setting mode for MIDI command
transmission interval time.
LIST
2
Rotate the track select knob.
X-F LINK
• For details on the relationship between the level display position
of the channel/master level meter and the MIDI command
20 msec
transmission interval time, see "Setting value" and "Example".
• The factory setting is 4 msec.
3
Press the track select knob.
The MIDI command transmission interval time is entered.
19 msec
4
18 msec
Press
SHIFT
17 msec
The settings are completed, and unit exits the setting mode.
16 msec
15 msec
NOTE
14 msec
13 msec
It's very unlikely that this setting needs to be changed from the default
12 msec
of 4 ms for newer computers. You should only change this to a higher
11 msec
setting in the case of communication issues with the DJ application.
13 msec
power
operation
switch
while
PANEL
,
LIST
, and
X-F LINK
for DECK 1/3 or 2/4.
20 msec
16
MIDI control function
Input channels on deck control and mixer parts support the USB MIDI
control function. The deck control part always issues MIDI commands
based on panel operations.
When the channel input source select knob of each input channel is
set to PC, MIDI commands are output from each channel.
None of the sliding switches are compatible with MIDI output, with
MIC1/2 LEVEL
BOOTH ASSIGN
the exception of
,
assignment switch.
.
and Cross fader
Hide quick links:
Advertisement
Table of Contents
