Effecter Screen; Effecter Operations; Selecting The Effector Units And Channels; Setting The Bpm - Denon FN-X1700 Owner's Manual

Effecter Screen

q
w
e
r
y
u
i
Q0
q Effect display
The names of the effects now selected are displayed here.
w BPM mode indicator
AUTO :
AUTO is displayed when AUTO BPM has been selected as the
BPM mode setting.
TAP :
TAP is displayed when the TAP input mode has been selected.
INPUT :
INPUT is displayed when the INPUT mode has been selected.
e BPM source indicator
The signal source now subject to auto BPM detection is displayed
here.
r Lock icon
This lights when BPM is locked.
10
Q1 t
t Effecter BPM display
The current BPM value is displayed here.
y Beat display
The beat (number of beats) setting is displayed here.
u Time display
i Beat display bar
o Time display bar
Q0 Parameter control indicator
Q1 Dry/wet control indicator

Effecter Operations

Selecting the effector units and channels

With the input channels:
Using the
used. The same effect can be selected for a multiple number of
channels.
With the mic input and master output:
Using the
The insertion operation is initiated and just the one channel is
selected.
* It is not possible to select both effect units at the same time for all
the channels.
o

Setting the BPM

1
When the auto BPM counter is off, press the
button for over 1 second to turn the auto BPM counter
on.
2
When the auto BPM counter is on, press the
button and release it immediately. The data measured
with the auto BPM function is locked.
* The channel for which the effect unit was last
selected using the
takes effect as the channel used for the auto BPM
counter measurement.
3
Press and hold in the
The BPM can now be input manually. The BPM
value can be set directly by pressing the
buttons.
4
BPM is measured at the interval during which the
TAP
buttons are repeatedly pressed.
EFX SEND 1 and 2
buttons, select the effect units to be
EFX INS 1 or 2
button, select the effect unit to be used.
EFX SEND EFX INS
or
TAP
button for over 2 seconds.
BEAT
TAP
TAP
button
,