Table of Contents
Advertisement
Utility settings
Utility operations
In the Utility mode, the preset data inside the device can be set.
1
UTILITY/–USB A/USB B
Press the
screen now appears.
2
EFFECT SELECT2
Using the
control, select the item,
and press the control to enter the selection.
When the selection is entered, the items and data
are switched using the hierarchy shown in the table
below.
To go back to the selection, press the
Operation then returns to the previous screen.
3
UTILITY/–USB A/USB B
In the Utility mode, press the
button to turn off the Utility mode.
The data which has been set is now stored in the
internal memory.
Preset Items and Data
Category
1 Audio Setting
button. The utility
BACK
button.
2 System Setting
3 MIDI Setting
4 Other Setting
5 Owner Setting
*1 When SOLO is selected as the CUE mode setting, only one of the two CUE buttons, whichever was pressed last, becomes operational.
*2 The cut-off position of the Crossfader can be adjusted separately for each side.
*3 When the unit is connected to a computer which runs Windows XP, Vista or a similar operating system, select the PC Mode.
When it is connected to a computer which runs Mac OSX or a similar operating system, select the MAC Mode.
*4 The settings for these Preset and the Owner mode settings can be stored on an external USB memory or other memory device.
*5 The settings for these Preset are set to the factory settings.
Item
Parameter
1 Master Setting
1 MONO
1 Ducking Level
2 Mic Setting
2 Mic EQ
3 Mic to Booth/Rec
1 X.Over Hi
3 Isolator EQ
2 X.Over Low
3 Default
4 Cue Setting
1 Cue Mode *¹
1 EQ Hi
5 Head Phones EQ
2 EQ Low
3 Default
6 EFX Send/Rtn
1 Unity Level Select
1 OutputSourceSelect
7 USB Audio Setting
2 Output Level VR
3 CH Input Level VR
4 Mas Input Level VR
5 Cue Input Level VR
1 Digital Output VR
8 Digital I/O Setting
2 Digital Input Level
1 A Side Cut Position *²
9 X-Fader Setting
2 B Side Cut Position *²
10 Beat Breaker Setting
1 Sampling Frequency
2 Display Brightness
3 Display Backlight
4 Display Contrast
5 PC/MAC*³
6 Version(SYS)
1 MIDI INPUT CH
2 MIDI OUTPUT CH
1 5Pin
3 MIDI Output Enable
2 USB
1 5Pin
4 MIDI CLK
2 USB
1 Preset Export
2 DN-X1700 Initialize
Display only
Value
ON / OFF
-20dB to -40dB
1 Hi
1kHz to 4kHz
2 Low
500Hz to 2kHz
3 Default
ON / OFF
1kHz to 8kHz
100Hz to 800Hz
CUE (Mix) / Solo
-15dB to +15dB
-15dB to +15dB
-10dBV / 0dBV
1 USB1 / USB2
2 USB3 / USB4
Non, CH1, CH2, CH3, CH4,
3 USB5 / USB6
Master, Rec, Mic
4 USB7 / USB8
-20dB to +20dB
-20dB to +20dB
-20dB to +20dB
-20dB to +20dB
-20dB to +20dB
CH1
-2dB / -8dB / -14dB
CH2
-2dB / -8dB / -14dB
CH3
-2dB / -8dB / -14dB
CH4
-2dB / -8dB / -14dB
-2.0mm to +8.0mm
-2.0mm to +8.0mm
1 to 5
44.1KHz / 48KHz / 96KHz
1 to 40
1 to 25
1 to 16
PC Mode / MAC Mode
XXXX
1 to 16, OMNI
1 to 16
ON / OFF
ON / OFF
ON / OFF
ON / OFF
Exit / Execute*
4
Exit / Execute*
5
Default
Settings
OFF
-30dB
2kHz
1kHz
-
OFF
2kHz
360Hz
-
CUE (Mix)
0dB
0dB
-
-10dBV
Master
Mic
CH2
CH3
0dB
-6dB
-6dB
-6dB
0dB
-8dB
-8dB
-8dB
-8dB
0.0mm
0.0mm
1
96kHz
27
5
15
PC Mode
-
1
1
ON
ON
ON
ON
Exit
Exit
17
Advertisement
Table of Contents
