Setting The Beat; Selecting The Effects; Turning The Effects On And Off; Fader Start - Denon FN-X1700 Owner's Manual

Setting the beat

1
BEAT
Press the , buttons to set the number of
beats.
2 TIME
When the button
mode is changed to the time input mode.
The time can be adjusted by pressing the
buttons.
3
TIME
When the button is pressed again, the number
of beats setting mode is restored.

Selecting the effects

EFX SELECT
Turn the controls to select the effect, and press the control
to enter the desired effect.

Turning the effects ON and OFF

Effect ON/OFF
When the buttons are pressed, the effect is turned ON
or OFF .

Fader Start

Channel Fader Start

is pressed, the
1
Using the
BEAT
,
(SOURCE SEL LN1/LN2/LN3/LN4/D1–4/USB), select
the desired source from LINE1 CD, LINE2 CD, LINE3
CD or LINE4 CD.
2
Turn on the
3
Channel input fader (CH FADER)
Move the
CH-2, CH-3 or CH-4 control all the way to the
bottom.
4
Set the standby mode on CD player.
5
When you want to start the player, move up the
Channel input fader (CH FADER)
will begin playing.
channel input source selector
controls
CH FADER START
switch.
of CH-1,
and the CD player

Crossfader Start

1 channel input source selector
Using the
(SOURCE SEL LN1/LN2/LN3/LN4/D1–4/USB), select
the desired source from LINE1 CD, LINE2 CD, LINE3
CD or LINE4 CD.
2
CROSSFADER ASSIGN
Set the switches (A/THRU/B)
to A or B.
3 CROSSFADER START
Turn on the
4
Crossfader
Slide the all the way in direction opposite
the source you want to start. (In the following example,
startup is done with the CD player connected set to
Assign A.)
5
Set the standby mode on CD player.
6
CROSSFADER CONTOUR
Use the
the cross fader startup curve.
7 Crossfader
When the is slid in the opposite direction,
CD player play will begin.
controls
switches.
control to control
11