Table Of User Options - Braeburn 5310 User Manual

Table of User Options

NOTE: Some user options may not be available, depending on how your thermostat was configured in the
Installer Settings (see Installer Manual). A detailed description of each User Option follows this table.
No. User Options
1 Audible Tone
2 Filter Service
Monitor
3 UV Light Service
Monitor
4 Humidifier Pad
Service Monitor
5 Extended Hold Period
6 Temporary Override
Adjustment Limit
7 Program Override
Time Limit
8 Thermostat Lock Code
Factory Setting
Default Options
on BEEP on BEEP
oF BEEP
OFF OFF
30, 60, 90,
120, 180, 365
OFF OFF
180, 365
OFF OFF
180, 365
LONG LONG
24HR
0 ADJ 0, 1, 2, or 3
ADJ 0
4 TEMP 4, 3, 2 or 1
TEMP
000 0-9
Comments
Enables an audible key press tone.
Disables an audible key press tone.
Disables filter service monitor feature.
Selects a number of days that must pass before the
thermostat will flash a Service Filter reminder
in the display screen.
Disables filter service monitor feature.
Selects a number of days before the thermostat will
flash a Service UV reminder in the display screen.
Disables filter service monitor feature.
Selects a number of days before the thermostat will
flash a Service Humid reminder in the display screen.
Selects long (permanent) hold mode.
Selects 24 hour (temporary) hold mode.
Selects a temporary temperature adjustment limit of
0 (disabled), 1˚, 2˚ or 3˚.
Selects a temporary program override time limit of
1, 2, 3 or 4 hours.
Select a 3 digit lock code of 0-9 for each digit.
9
Pg.
10
10
10
10
10
11
11
11
User Manual