Changing The Batteries - Braeburn 5310 User Manual

Changing the Batteries

This thermostat requires two (2) properly installed "AA"
alkaline batteries to maintain the thermostat clock and to
provide power for the thermostat if 24 volt AC power is not
+
connected. (See Installer Manual).
If batteries become low, a battery indicator will appear
in the display.
You should change your batteries immediately
when you see the low battery signal by following
these instructions. +
1. Remove thermostat body by gently pulling it from base.
2. Remove old batteries and replace with new batteries.
3. Make sure to correctly position the (+) and (-) symbols.
4. Gently push thermostat body back onto base.
NOTE: We recommend replacing the thermostat batteries annually or if the thermostat will be unattended for
an extended period of time.
User Manual 34