Programming a 7 Day Residential Schedule
The 7 day residential programming mode gives you the option to program individual days (1 day at a time) or to
use SpeedSet and program the entire week (all 7 days) with a 4 event program schedule.
Setting All 7 Days at Once (SpeedSet
NOTE: Setting all 7 days at once will copy over any previously programmed individual days.
1. Hold the
PROG
TouchPad
switch to SpeedSet programming mode. All 7 days of the
week will appear and the hour will be flashing.
2. Touch
SYSTEM
to select HEAT or COOL.
3. Press the SpeedBar
the MORN (morning) event. Touch NEXT.
4. Press the SpeedBar up or down to adjust the minute for the
MORN event. Touch NEXT.
5. Press the SpeedBar up or down to adjust the temperature for
the MORN event. Touch NEXT.
6. Press the SpeedBar up or down to adjust the fan setting for
the MORN event. Touch NEXT.
7. Repeat steps 3-6 for the DAY, EVE and NIGHT events.
8. If needed, repeat steps 2-7 to program the opposite mode (HEAT or COOL).
9. Touch
RETURN
to exit.
User Manual
for 3 seconds. The display will
™
up or down to adjust the hour for
®
)
TM
16